Additional Features, Copying from DVD To VCR

Additional Features

Last Scene Memory

DVD CD VCD

This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the player. If you load a disc that has the scene memorized, the scene is automatically recalled.

Note:

This player does not memorize the scene of a disc if you switch off the player before commencing to play the disc.

Screen Saver

The screen saver appears when you leave the DVD player in Stop mode for about five minutes.

Copying from DVD To VCR

This unit allows you to copy the contents of a DVD to a VHS tape with a press of the REC (z) button.

Notes:

If the DVD you are attempting to copy is copy protected, you may not be able to copy the disc.

1.Insert Disc

Insert the disc you wish to copy in the DVD deck and close the disc tray.

2.Insert VHS Tape

Insert a blank VHS videotape into the VCR deck.

3.Copy the DVD to VHS Tape Press the REC (z) button.

The DVD will go into Play mode and the VCR will go into Record mode.

If the DVD disc menu appears, you may need to press the Play button manually to begin copying.

Note:

If you press the REC (z) button, be sure this unit in DVD mode.

4.Stop the Copy Process

When the DVD is finished playing, press x to end the copy.

You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again.

Recording from another video recorder

With this video recorder you can make recordings from an external source, such as copying from another video recorder or a camcorder.

Note:

In the following description, this video recorder will be one used for recording and will be referred to as VCR B. The other appliance will be used for playback and will be referred to as VCR A.

1.VCR A should be connected to the SCART socket on the rear panel of your unit or the AV sockets on the front panel of your unit.

2.Insert the recorded tape into VCR A and a blank tape into VCR B.

3.Press AUX until the socket you wish to record from is displayed. (VCR B)

AV 1 for recording from EURO AV1 SCART socket on the rear of your unit.

AV 2 for recording from EURO AV2 SCART socket on the rear of your unit.

AV 3 for recording from VIDEO IN and AUDIO IN (Left & Right) sockets on the front of your unit.

4.To start recording, press the REC (z) on VCR B and PLAY on VCR A.

5.When you want to finish copying, press the x on both video recorders.