JVC HR-XV32E To cancel or change a programme, Disengage the timer mode, Return to the timer mode

Filename [XV3EX_07S-VHS.fm]
XV3EX_01.book Page 27 Friday, August 22, 2003 12:21 PM	Masterpage:Right-No-Heading

EN 27

To Timer-Record Weekly Or Daily Serials:	Check, cancel and change programmes
— anytime during steps D through I, press WEEKLY (number
key “9”) for weekly serials or DAILY (number key “8”) for daily
serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears	A Disengage the timer mode.
on the TV screen. Pressing the button again makes the
corresponding indication disappear.

Press #, then press 1.

NOTES:

● You can programme this unit to timer-record as many as 8

programmes. If you try to programme the unit to record a	B Access the Programme Check screen.
ninth, “PROGRAM FULL” appears on the TV screen and	Press ".
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes. ( “To cancel or change a programme”)
● If there is a conflict in the timer schedule and one programme
overlaps with another, the programme starting earlier or
programme with the lower programme number will be
recorded.

Satellite Receiver Users

To timer-record a satellite broadcast using Express Timer Programming:

ASet “L-2 SELECT” to “A/V”. ( pg. 64)

BPerform steps A – K. Enter “L-2” for the channel position in step G.

CSet the satellite receiver to the appropriate channel before the selected programme begins.

DLeave the satellite receiver’s power on.

C Access the Programme screen.

Press " again to check more information. Each time you press ", the next programme’s information appears.

To cancel or change a programme

D Cancel or change a programme.

Press & to cancel a programme. To change programme settings, press the appropriate button: START +/–, STOP +/–, DATE +/–, PR +/–, VPS/PDC (number key “7”), DAILY (number key “8”), WEEKLY (number key “9”) and/or p.

E Return to the normal screen.

Press " as many times as necessary. If there are still some programmes remaining, go on to step F.

F Return to the timer mode.

Press #.

NOTE:

You can also check the programmes on the front display panel even if the unit’s power is off (unless the unit is in the Power Save mode  pg. 64) or the unit is in the Timer mode; however, it is not possible to cancel or change the programmes.

Page 27

August 22, 2003 12:20 pm