JVC HR-XV32E manual 68 EN, Tuner Set, Perform Auto Channel Set, View the Confirmation screen

Filename [XV3EX_10Subsidiary.fm]
XV3EX_01.book Page 68 Friday, August 22, 2003 12:21 PM	Masterpage:Left+

68 EN		SUBSIDIARY SETTINGS (cont.)
Tuner Set	D
		Access the Auto Channel Set screen.

IMPORTANT

Perform the following steps only if —

—Auto Channel Set has not been set correctly by Auto Set Up or by Preset Download. ( pg. 10, 12)

—you have moved to a different area or if a new station starts broadcasting in your area.

Your unit needs to memorize all necessary stations in channel positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the PR buttons without going through any vacant channels.

Press rt to move the highlight bar (pointer) to “AUTO CH SET”, then press OK or e.

E Select your country.

Press rt to move the highlight bar (pointer) to your country’s name, then press OK or e.

F Select the language.

Press rt to move the highlight bar (pointer) to the language of your choice.

G Perform Auto Channel Set.

Press OK twice.

● When you have connected
the unit to a TV offering T-V
Link via a fully-wired 21-pin
SCART cable ( pg. 9), the
unit automatically performs
the Preset Download and the
T-V LINK screen will appear.
( pg. 12)
● The Auto Set screen appears,	Beginning	End
and remains on screen while

the unit searches for receivable stations.

As Auto Channel Set progresses, the “q” mark on the TV screen moves from left to right. Wait until the TV screen as shown in step H appears.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

Auto Channel Set

A Turn on the unit.

Press 1.

B Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

C Access the Main Menu screen.

Press SET UP MENU.

H View the Confirmation screen.

After “SCAN COMPLETED” is displayed on the TV screen for about 5 seconds, the Confirmation screen looking like the one to the right appears. The stations your unit located appear on the Confirmation screen — channel positions (PR),

channels (CH) and station names (ID –  pg. 72). The blueback screen and the programme currently being broadcast by the blinking station appear alternately for 8 seconds each. To view the next page, use the rt w e button on the remote control.

●The stations located in the selected country appear at the top of the list.

●The Guide Program numbers will also be set automatically during Auto Channel Set.

I Return to the normal screen.

Press SET UP MENU.

Page 68

August 22, 2003 12:20 pm