JVC HR-XVC32SUJ manual Component Video Connection, ⁄ Set the VCR channel to off

Page 10

Component Video Connection

(For high-quality DVD pictures)

Antenna or Cable

Coaxial cable

Flat feeder

Matching transformer (not supplied)

ATTENTION

Be sure to connect the unit’s VIDEO OUTPUT (DVD/ VCR) connector to the TV’s VIDEO input connector.

~Place the unit on a stable, horizontal surface.

ŸConnect the unit to TV.

1Connect the antenna, unit and TV as per “AV

Connection.” (☞ pg. 9)

2Connect the unit’s COMPONENT VIDEO OUTPUT connector to the TV’s component video input connector.

!Plug the end of the AC power cord into an AC outlet.

AC Outlet

AC Power Cord

AUDIO OUTPUT

VIDEO OUTPUT

This unit performs Plug&Play Set automatically. (☞ pg. 11)

The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is connected to an AC outlet for the first time. (If

AUDIO OUTPUT

COMPONENT VIDEO OUT

VHF/UHF

IN

Back of unit	VHF/UHF
	OUT

“Auto” and the channel indicator are displayed on the front display panel before the unit is powered on, the clock and tuner channels are being set automatically. Wait for the time to be displayed on the front display panel before turning on the unit.)

⁄Set the VCR channel to off.

Before performing the following steps:

•Make sure there is no cassette inserted in the unit.

•Make sure the unit is turned on, then press VCR/DVD on the unit so that the VHS indicator lights up on the front display panel.

Component

Audio/video cable (not supplied)

1 Press POWER on the unit to turn off the unit, then

press 7 STOP on the unit for more than 5 seconds.

Video cable

Audio cable (not supplied)

“3 CH” appears on the front display panel.

(not supplied)

To Component
Video/audio Input	To Audio/video
connector	input connectors

	RF cable
	(supplied)
TV	To 75 ohm Terminal
TV

2Press CH +/– on the unit to select “3 CH,” “4 CH,” or “– CH” (off), then press POWER on the unit.

NOTES:

•By using the component video connection, you can view the images in the progressive mode. For switching to the progressive mode, refer to “Scan Mode Set (DVD deck only).” (☞ pg. 11)

•To enjoy playback of DVD with the component video connection, set the TV’s input to the component video input.

10

Image 10

Contents Introduction Preparation Advanced Operations Additional InformationAllAll inin ThisThis ComboCo bo Unitnit Unit’s region code is printed on the rear of the unitSafety First Power System Dear CustomerTo mobile phone users Video heads cleaningDo not block the unit’s ventilation openings or holes On placing the unitSupported Digital audio formats Full-Size VHSCompact VHS DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM Photo CD, SacdRear View Buttons, Connectors, and IndicatorsPower OPEN/CLOSEHow to use the Remote On ScreenConnect the unit to TV ConnectionsBasic Connections ⁄ Set the VCR channelComponent Video Connection Plug the end of the AC power cord into an AC outletPress Power on the unit to turn off the unit, then ⁄ Set the VCR channel to offScan Mode Set DVD deck only Initial SettingsPlug&Play Set Language Set Initial Settings Monitor Set DVD deckOn-screen Language Set VCR deck Menu/Audio/Subtitle Language Set DVD deck only On-screen Language Set DVD deckLanguage Manual Clock Set Initial Settings Clock SetPreparations Semiauto Clock SetAuto Channel Set Tuner SetManual Channel Set Basic Playback Playback on VCR DeckDuring playback On-Screen Display VCR deck Index Search Playback on VCR Deck Playback FeaturesSkip Search Instant ReViewOne Touch Replay Adjusting Tracking ConditionRepeat Playback Selecting SoundtrackRecording Recording FeaturesBasic Recording Timer Recording Express Timer ProgrammingTo cancel or change a program Timer RecordingCheck, cancel and change programs When programs overlap each otherSatellite Auto Recording Engage the Satellite Auto Recording modeSet the tape speed Zooming the picture Using the disc menuPlayback on DVD Deck ~ Load a discChanging the Sound Field To adjust the picture toneChanging the language, sound Scene angle Changing the picture tone VFPPlayback on DVD Deck Menu Bar Functions Basic Operation ProcedureWhen a disc is inserted, press on Screen twice To Bring Up the Menu BarGroup/File Selection MP3/JPEG Files PlaybackControl Display Zooming a still pictureCamcorder EditingEditing with another video recorder or a ⁄ Start dubbing Dubbing from DVD to VCRPrepare the DVD deck for dubbing @ End dubbingSystem Connections Digital Audio OUTChild Lock Remote A/B/C/D Code SwitchingOther Functions Tray Lock~ Select the VCR deck Select the mode Subsidiary SettingsMode Set VCR deck Access the Main Menu Screen, then select Function SetBlue Back Auto Power OFFVideo Stabilizer Audio Monitor~ Select the DVD deck Select the mode Subsidiary Settings Mode Set DVD deckPicture Settings Access the DVD Set UpAudio Settings Other SettingsSymptom Possible Cause Corrective Action TroubleshootingPower PlaybackQuestions & Answers PlaybackVIDEO/AUDIO VCR deck Language Code ListSpecifications VIDEO/AUDIO DVD deckMode Set VCR deck List of TermsHR-XVC32SUJ