Timer Recording
Express Timer Programming
~Select the VCR deck.
Press VCR on the Remote so that the VHS indicator lights up on the front display panel.
ŸAccess the Program screen.
Press PROG. (If you’re just starting out, “PROGRAM 1” appears.)
! Enter the program start time.
Press START +/– to enter the time you want recording to start.
•Press and hold START +/– to move in
increments, or press and release repeatedly to move 1 minute at a time.
⁄Enter the program stop time.
Press STOP +/– to enter the time you want recording to stop.
•Press and hold STOP +/– to move in
@Enter the program date.
Press DATE
•The current date appears on the TV screen. The date you enter appears in its place.
¤Enter the channel position.
Press CH
#Set the tape speed.
Press SP/EP.
‹Return to the normal screen.
Press PROG or ENTER. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears on the TV screen, see page 22.
• Repeat step Ÿ to ‹ for each additional program.
$Engage the unit’s timer mode.
Press TIMER. The unit turns off automatically and “
” appears on the front display panel.
• To disengage the timer mode, press TIMER again.
To Timer-Record Weekly Or Daily Serials:
—anytime during steps ! through #, press WEEKLY (number button “9”) for weekly serials or DAILY (number button “8”) for daily serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.
NOTES:
•You can program this unit to
•Programs that start after midnight must have the next day’s date.
Cable Box or DBS Receiver Users
To
1Perform steps ~ – $. Enter
2Set the DBS receiver to the appropriate channel before the selected program begins.
3Leave the DBS receiver’s power on.
Introduction
Preparation
Operations on VCR Deck
Operations on DVD Deck
Advanced Operations
Additional Information
21