JVC HR-XVC32SUJ manual Basic Recording, Recording Features

Page 20

Recording

Basic Recording

•Turn on the TV and select the VCR channel (or AV mode).

•Slide the TV/VCR/DVD switch on the Remote to the right.

~Load a cassette.

Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.

•The recorder turns on, and the counter is reset, automatically.

ŸSelect the VCR deck.

Press VCR on the Remote so that the VHS indicator lights up on the front display panel.

!Select recording channel.

Press CH +/– or the number buttons.

•You can select channel in the stop mode or recording pause mode.

⁄Set tape speed.

Press SP/EP. The current setting for the tape speed appears on the display panel and the screen for about 5 seconds. Press SP/EP again to change the setting while tape speed is displayed.

@Start recording.

On the recorder, press REC. Or on the Remote, while holding REC, press 3 PLAY.

•If the tape reaches its end during recording, the recording stops and “” and “3” on the display panel blink.

During recording

Pause recording

Press 8 PAUSE.

•Press 3 PLAY to resume recording.

•You can select channel in the recording pause mode.

Stop recording

Press 7 STOP on the Remote.

Recording Features

Watching one programme while recording

another

If your recorder is connected to the TV via the AV connection, press TV/VCR. The recorder’s VCR indicator and the TV broadcast being recorded disappear. Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

•The programme selected with the TV’s channel controls appears on the screen, while the one selected with the CH +/– is recorded on the tape.

Instant Timer Recording (ITR)

During recording, press REC on the unit repeatedly until the desired recording length appears on the display panel. “” on the display panel starts blinking.

•Each time you press the button, recording length increases in 30-minute intervals (up to 6 hours).

•The unit turns off after recording is fi nished.

Tape Remaining Time/Time Counter

Press DISPLAY repeatedly to display the tape remaining time and time counter on the front display panel. To reset the time counter, press C.RESET.

NOTE:

Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct.

“– –:– –” may sometimes appear with “:” blinking, or the display may blink on occasion.

Second Audio Recording

This unit’s built-in MTS decoder enables reception of Multichannel TV Sound broadcast. To record a SAP program received, set “2ND AUDIO RECORD” to “ON.” (☞ pg. 33)

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Introduction Preparation Advanced Operations Additional InformationAllAll inin ThisThis ComboCo bo Unitnit Unit’s region code is printed on the rear of the unitSafety First Power System Dear CustomerVideo heads cleaning Do not block the unit’s ventilation openings or holesTo mobile phone users On placing the unitFull-Size VHS Compact VHSSupported Digital audio formats DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM Photo CD, SacdButtons, Connectors, and Indicators PowerRear View OPEN/CLOSEHow to use the Remote On ScreenConnections Basic ConnectionsConnect the unit to TV ⁄ Set the VCR channelPlug the end of the AC power cord into an AC outlet Press Power on the unit to turn off the unit, thenComponent Video Connection ⁄ Set the VCR channel to offPlug&Play Set Initial SettingsScan Mode Set DVD deck only On-screen Language Set VCR deck Initial Settings Monitor Set DVD deckLanguage Set Language On-screen Language Set DVD deckMenu/Audio/Subtitle Language Set DVD deck only Initial Settings Clock Set PreparationsManual Clock Set Semiauto Clock SetManual Channel Set Tuner SetAuto Channel Set During playback Playback on VCR DeckBasic Playback On-Screen Display VCR deck Playback on VCR Deck Playback Features Skip SearchIndex Search Instant ReViewAdjusting Tracking Condition Repeat PlaybackOne Touch Replay Selecting SoundtrackBasic Recording Recording FeaturesRecording Timer Recording Express Timer ProgrammingTimer Recording Check, cancel and change programsTo cancel or change a program When programs overlap each otherSet the tape speed Engage the Satellite Auto Recording modeSatellite Auto Recording Using the disc menu Playback on DVD DeckZooming the picture ~ Load a discTo adjust the picture tone Changing the language, sound Scene angleChanging the Sound Field Changing the picture tone VFPBasic Operation Procedure When a disc is inserted, press on Screen twicePlayback on DVD Deck Menu Bar Functions To Bring Up the Menu BarMP3/JPEG Files Playback Control DisplayGroup/File Selection Zooming a still pictureEditing with another video recorder or a EditingCamcorder Dubbing from DVD to VCR Prepare the DVD deck for dubbing⁄ Start dubbing @ End dubbingSystem Connections Digital Audio OUTRemote A/B/C/D Code Switching Other FunctionsChild Lock Tray LockSubsidiary Settings Mode Set VCR deck~ Select the VCR deck Select the mode Access the Main Menu Screen, then select Function SetAuto Power OFF Video StabilizerBlue Back Audio MonitorSubsidiary Settings Mode Set DVD deck Picture Settings~ Select the DVD deck Select the mode Access the DVD Set UpAudio Settings Other SettingsTroubleshooting PowerSymptom Possible Cause Corrective Action PlaybackQuestions & Answers PlaybackLanguage Code List SpecificationsVIDEO/AUDIO VCR deck VIDEO/AUDIO DVD deckMode Set VCR deck List of TermsHR-XVC32SUJ
Top Page Image Contents