JVC HR-XVC32SUJ manual Video Stabilizer, Blue Back, Audio Monitor, Hi-Fi, Auto Power OFF

VIDEO STABILIZER	When this function is set to “ON,” you can automatically correct vertical vibration in the picture
ON	when playing back unstable recordings made on another recorder.
	NOTES:
OFF
	• When you fi nish viewing a tape, be sure to set this function to “OFF.”
	• Regardless of the setting, this function has no effect during recording and during special
	effects playback.
	• The on-screen display may jitter vertically when this function is set to “ON.”
	• To watch recordings with close-caption, set this function to “OFF.”
BLUE BACK	When this function is set to “ON,” the TV screen becomes all blue when receiving a channel not
ON	in use.
	NOTE:
OFF
	When you want to receive an unstable channel with poor signals, set this function to “OFF.”
2ND AUDIO RECORD	• When this function is set to “ON”;
ON	If a SAP program is received, the SAP audio is recorded on both the normal and Hi-Fi tracks.
	The main audio is not recorded.
OFF
	If a non-SAP program is received, the main audio is recorded on both the Hi-Fi and normal
	tracks.
	• When this function is set to “OFF”; the SAP audio cannot be recorded.
	NOTES:
	When the channel is changed on the unit;
	• The “STEREO” indicator appears on the screen for about 5 seconds if the program is a stereo
	broadcast.
	• The “SAP” indicator appears on the screen for about 5 seconds if the program is a SAP
	broadcast.
	• Both indicators appear when a stereo program is accompanied by SAP sound.
AUDIO MONITOR	This unit can record two sound tracks simultaneously (normal and Hi-Fi) on a Hi-Fi stereo tape.
HI-FI	You can select the sound track(s) to listen to while playing back a Hi-Fi stereo tape. In addition,
	when playing back a prerecorded tape containing two separate audio programs on the Hi-Fi
HI-FI L	tracks, you can choose either one by selecting either “HI-FI L” or “HI-FI R.”
HI-FI R	HI-FI:	Normally select this. Hi-Fi sound is played back.
NORM
	HI-FI L: Sound on the left Hi-Fi channel is played back.
MIX
	HI-FI R: Sound on the right Hi-Fi channel is played back.
	NORM: Sound on the normal track is played back.
	MIX:	Both sounds on the Hi-Fi track and normal track are mixed and played back.
	NOTES:
	• While playing back a monaural tape, sounds on the normal track will be heard regardless of
	this setting.
	• You can also use the A.MONITOR button on the Remote to select the desired monitor sound.
	(☞ pg. 19)
AUTO POWER OFF	When this function is set to “3H,” the unit is turned off automatically if no operation is done
3H	within 3 hours. “AUTO POWER OFF IN 3 MIN” appears on the screen 3 minutes before the unit
	is turned off.
OFF

Introduction

Preparation

Operations on VCR Deck

Operations on DVD Deck

Advanced Operations

Additional Information

33