JVC HR-XV2E owner manual Before Operation VCR part Setting the clock Manually

Before Operation - VCR part

Setting the clock Manually To set the colour system

The clock in your VCR controls time and date settings for your VCR.

The clock is set automatically during ACMS (Automatic Channel Memory System) when your VCR detects a channel that broadcasts a Teletext signal. If the broadcast signal is weak the clock will not be set and will require setting manually.

1Press 1 or 2 to select TIME DATE. Press OK.

The auto adjust mode can be set to “OFF” by pressing

D or E if you want to set the time manually. Press OK.Press MENU.

1Press MENU.

2The main menu will appear on the TV screen.

3Press 1 or 2 to select the SYSTEM and press OK.

4 Press 3 or 4 to select according to the COLOUR system used.

	P AUTOPr-12		1 2		A B
REC			TIME	SYS-	C
	RSET	ACMS	DATE	TEM	OSD	SYS-
	PAL				NIC
fOSD			+ -			TEM
	MESECAMSTB
ON	16:9	THR-	DECO-	EPC		i
OFF	4:3	OUGH	DER

AUTO ADJUST : ON

- -

1 2

TIME	OK i
DATE

5 Press MENU to remove the menus from the TV screen.

	HH	MM	DD	MM	YY
	- - : - -		- - . - - . - -			- - -
1	2
TIME						i
DATE

2to alter the HOURS, MINUTES, DAY, MONTH and YEAR.

Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00.

The day of the week will appear automatically when you enter the year.Use the numbered buttons on the remote control

	HH	MM	DD		MM	YY
	8 :	00	1	.	01 .	03	WED
1	2
TIME							i
DATE

3 If you make a mistake press 1 or 2 and enter the correct details.

4Press MENU.

14