Additional Operation - VCR part
On Screen Display
You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape.
Press DISPLAY to display.
1 Press DISPLAY repeatedly to cycle through the display options. The tape counter and amount of tape left will appear if there is a tape loaded.
2Displays will clear leaving only the clock or tape counter and the amount of tape left on the screen.
Press DISPLAY again to remove all displays from the TV screen.After 3 seconds the majority of the On Screen
Tape Counter Memory Stop
The Digital Tape Counter can be displayed on the display window instead of the time by pressing DISPLAY on the remote control. The Digital Tape Counter indicates the relative positions of recordings on the tape.
1Press 0000 to set the counter to 0:00:00. Press PLAY 2 or start recording.
The tape counter will display the actual play time in hours, minutes and seconds.Press DISPLAY.
2Press m.
The tape will rewind and automatically stop when the counter returns to 0:00:00.Press 9 when playback or recording is complete.
Child Lock
The control buttons on the front of the VCR can be switched off so that your VCR can only be operated using the remote control.
1SAFE will flicker in the display window for a few seconds.
None of the buttons on the front of your DVD+VCR will work (except Á and 
).
If any buttons on the front of your unit are pressed
SAFE will flicker in the display window for a few seconds.Press .
2OFF will flicker in the display window for a few seconds.Press again to switch off the child lock.
OPERATION
33