JVC DR-MV5BE manual Auto Set Up, Number Set, Vhs Dvd, Enter

Filename [MV5S_05Name.fm]
MV5S_00.book Page 17 Wednesday, August 31, 2005 4:55 PM	Masterpage:Right0

INITIAL SETTINGS EN 17

	Auto Set Up	3 Press rt w e to select the
			INITIAL SET UP
		language of your choice, then	INITIAL SET UP / LANGUAGE SET
		press ENTER. The AUTO SET/
Auto Channel Set/Auto Clock Set/Auto Guide Program			ENGLISH		DEUTSCH	FRANCAIS	ITALIANO
		T-V LINK display appears on the
			ESPAÑOL		NEDERLANDS	SVENSKA	NORSK
		TV screen.
Number Set			SUOMI		DANSK
			SET UP		OK	SELECT WITH [CURSORS]
After the 1 button on the unit or remote control is pressed for		4 Press rt to select “AUTO	EXIT		SELECT	THEN PRESS [ENTER]
the first time to turn on the unit, by simply selecting your			INITIAL SET UP
country*, the Auto Set Up function sets the tuner channels,		SET”, then press ENTER. The	INITIAL SET UP / CHANNEL SET
		AUTO SET screen will appear,
clock** and Guide Program numbers automatically.				AUTO SET
* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also		and the unit automatically		T-V LINK
	need to select your language.	performs Auto Channel Set.
** If you live in Hungary (MAGYARORSZÁG), Czech Republic (CESKÁ		● When Auto Channel Set is
	REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe	completed, “PLEASE WAIT” will
	(OTHER EASTERN), set the clock manually.	be displayed for about 90	SET UP		OK	SELECT WITH [CURSORS]
			EXIT		SELECT	THEN PRESS [ENTER]
		seconds, since channel data is
		exchanged between the DVD
		deck and the VHS deck. No operation will be done during this time.

VHS

DVD

ATTENTION:

●When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable ( pg. 15) and the TV is turned on, the unit automatically performs the Preset Download ( pg. 18) even if you select “AUTO SET” for Auto Set Up function.

INITIAL SET UP

INITIAL SET UP / CHANNEL SET

AUTO SET		AUTO SET
T-V LINK
		PLEASE WAIT...
			CANCEL
SET UP	OK		SELECT WITH [CURSORS]
EXIT	SELECT		THEN PRESS [ENTER]

ENTER

ATTENTION:

Once you have performed Auto Set Up, even if the unit’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the unit’s memory and the unit will not perform Auto Set Up again. The unit only performs Auto Clock Set when the unit is turned on.

If you have moved to a different area, perform each setting as required.

●Tuner setting ( pg. 84)

●Clock setting ( pg. 88)

If a new station starts broadcasting in your area, perform tuner setting. ( pg. 84)

SET UP

Before starting, make sure of the following:

●The TV aerial cable should be connected to the unit.

●The unit’s AC power cord should be connected to a AC outlet.

●Turn on the TV and select the AV mode.

●Slide the TV/DVD switch to DVD.

1 Press 1 to turn on the unit. The Country Set display appears on the TV screen.

2 Press rt w e to select your	INITIAL SET UP
country’s name, then press	INITIAL SET UP / COUNTRY SET
ENTER. The Language Set
display appears on the TV screen.
NOTES:
● If you have selected BELGIUM or
SUISSE, go to step 3.	SET UP	OK	SELECT WITH [CURSORS]
● If you have selected	EXIT	SELECT	THEN PRESS [ENTER]

MAGYARORSZÁG, CESKÁ

REPUBLIKA, POLSKA or OTHER EASTERN, press ENTER. The Clock Set screen appears. Set the clock manually ( pg. 88), then go to step 4.

●If you have selected any other country name, go to step 4.

NOTES:

●In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If there is a power cut, or if you press 1 or SET UP while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the unit power once and try again from step 1.

●Auto Clock Set may not function properly depending on the reception condition.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. ( pg. 87, “INFORMATION”)

After “Auto Set Up” is completed, perform “Monitor Set (DVD Deck Only)” on page 21.

Page 17

Wednesday, 31 August 2005 16:55