Audiovox AXWD2002 owner manual Setup, Automatic Channel SET UP, To Select a Desired Channel

Page 17
SELEC. IDIOMA

SETUP

AUTOMATIC CHANNEL SET UP

VCR

The DVD/VCR can automatically program the tuner to scan only the channels which are available in your area.

¡Channel memory programming is NOT needed when the DVD/VCR is connected to a cable box or a satellite box as in "DVD/VCR TO TV CONNEC- TION" on page 14. In this case, set the CH3/CH4 Switch (which is located on the back of your VCR) to either CH3 or CH4, whichever is not used for nor- mal broadcasts in your area. Then set your TV to the same channel. The channel you want to record or view will be selected from the cable or the satellite box.

¡Follow the steps below once. Repeat only if there is a power failure or if the DVD/VCR is unplugged for more than 30 seconds. (In these cases, the pro- grammed channels are erased.)

¡You must follow the steps below before attempting to play or record a video tape.

1You need to connect the antenna or cable to the DVD/VCR first. Then, connect the DVD /VCR power plug to a standard AC outlet.

2Turn on the TV and set the TV to channel 3 or 4.

¡Now set the CH3/CH4 switch on the back of the DVD/VCR to match the channel selected on the TV.

3Turn on the DVD/VCR by pressing the POWER button. Both the POWER and the VCR/TV light will come on.

4Select the On Screen Language (“ENGLISH”, “FRANCAIS” or “ESPAÑOL”) by pressing the PLAY or the STOP button.

Then, press the F.FWD but-

ton.

ENGLISH

FRANCAIS

 

 

ESPAÑOL [ON]

5Begin channel preset by pressing the F.FWD button once. The tuner scans and memorizes all active channels in your area.

¡The DVD/VCR distinguishes

CA 01

between standard TV channels

 

and cable channels.

AJUSTE AUTO

 

6After scanning, the tuner stops on the lowest memorized channel. The TV screen returns to TV mode.

¡If “AJUSTE AUTO” appears on the TV screen again, check the cable connections. Press the F.FWD button once again and the DVD/VCR will begin pre- set again.

TO SELECT A DESIRED CHANNEL

You can select the desired channel by using the CHANNEL buttons (o/p) or by directly pressing the Number buttons on the remote control.

Note for using the Number buttons:

¡When selecting cable channels which are higher than 99, press the +100 button first, then press the last two digits.

¡You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).

TO PRESET THE CHANNELS AGAIN

1Press the MENU button until the main menu appears. (If you have already set the clock, you only have to press it once. If not, you have to press it twice).

2Select “AJUSTE CANAL” by pressing the PLAY or the STOP button. Then, press the F.FWD button.

3Select “AJUSTE AUTO” by pressing the PLAY or the STOP button. Then, press the F.FWD button.

¡After scanning, the tuner stops on the lowest memo- rized channel.

– 17 –

EN

1L25

Page 16 Page 18
Image 17
Page 16 Page 18
Contents AXWD2002 Laser Safety Important Safeguards About Copyright Supplied AccessoriesSymbols Used in this Manual Indice Table of ContentsDVD Mode FeaturesVCR Mode PrecautionsPlayable Discs About the DiscsExample Following discs cannot be played back on this DVD/VCROperating Controls and Functions +100 Button Press to change TV channels on the DVD/VCR Press to select VCR mode for the remote controlPress to skip Chapters or Tracks Loading the Batteries DisplaySwitching to VCR Mode Switching to DVD Mode VCR/DVD SwitchingConnecting to a TV SwitchHookups DVD/VCR to TV ConnectionFor TVs with Component Video in Jacks Dolby Digital DTS decoder Automatic Channel SET UP SetupTo Preset the Channels Again To Select a Desired ChannelTo Change the ON-SCREEN Language Clock SET UPTo ADD/DELETE Channels ¡To go back one step, press the REW buttonNormal Playback Playback FunctionAuto Repeat Playback Search FunctionsRecording Function Timer RecordingViewing and Recording Same Program Accidental Erasure PreventionTo Stop AN Automatic Timer PRO- Gram Already Started Hints for Timer RecordingTo CHECK, CORRECT, or Cancel AN Automatic Timer Program To Clear a ProgramTo Monitor the Recording Special FeaturesCopying a Video Tape Playing a Disc Using the DVD MenusAuto Rewind Playing a DVD Video Video CD, or AN Audio CDResuming Playback from Point Where Playback Stopped Using the Title MenuPausing Playback or Displaying a Still Picture Stepping Through FramesSlow Motion Fast FORWARD/REVERSEStarting from a Desired Track Playing from a Desired Title or a ChapterMarker Starting from a Desired Time CountSet the marker Call back the markerYou can define a section to be played back repeatedly Repeat¡The starting point a will then be Repetir Selected ¡The selected section will be Played back repeatedlyTo Clear the Program Zoom PlaybackPlaying AN MP3 Disc When a Track is selectedWhen an Album is selected Playing a Desired Track From AN MP3 Disc ¡The random setting menu screen will appearPlaying AN MP3 Disc in a Program Playing AN MP3 Disc Randomly¡The current audio status will appear at the top SettingsChanging the Audio Language or Sound Mode Changing the Camera Changing the Subtitle Language¡The setup screen is displayed Black Level SettingsChanging the ON-SCREEN Display ¡Use the Number button to start from the desired chapterLanguage Settings Changing the Setup Items¡The setup screen will appear Display SettingsWhen playing a disc with copyright protection Audio SettingsAll parental lock is cancelled When Parental Level is selectedLanguage Country code Language Code ListProblem Corrective Action Troubleshooting GuideDisc Handling Handling PrecautionsSpecifications Memo Memo H9201MD 0VMN03350
Top Page Image Contents