Audiovox AXWD2002 Playing a Disc, Auto Rewind, Playing a DVD Video Video CD, or AN Audio CD

Page 23

AUTO REWIND

REAL TIME TAPE COUNTER

When a tape reaches the end during recording, play- back, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the DVD/VCR will eject the tape and switch itself off.

¡The DVD/VCR will not rewind the tape automatically during timer recording or One Touch Recording.

¡This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change during blank portions of the tape.)

¡The indication will appear when the tape is rewound further than “0:00:00” on the tape counter.

PLAYING A DISC

PLAYING A DVD VIDEO,

A VIDEO CD, OR AN AUDIO CD

DVD CD VCD

Getting started

Turn on the power of the TV, amplifier and any other components which are connected to the DVD/VCR. (Change the input system to suite the DVD/VCR, and check that the sound volume is correct).

1Press the POWER button.

¡The power will turn on.

Check that the DVD OUTPUT Light is lit. If not press the DVD button on the remote control to switch to DVD/VCR mode.

2Press the OPEN/CLOSE button.

¡The disc loading tray will open.

3Place a disc into the tray.

¡Make sure the disc is sitting properly in the correct recess, with the label side up.

4Press the PLAY button.

¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.

¡If your DVD has a title menu, it may appear on the screen. In this case, refer to “USING THE DVD MENUS” in the next section, or “USING THE TITLE MENU” on page 24.

5Press the STOP button to stop play.

Notes

¡If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.

¡With DVDs that use titles for playback program signals, playback may start from the second title, or it may skip these titles.

¡During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction.

USING THE DVD MENUS

DVD VCD

Some DVDs, or Video CDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings.

1Press the MENU button.

¡The DVD menu will appear.

2Select the desired title.

¡Press the Arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

3Playback will start from the selected title.

Cancelling PBC (for playback of a Video CD)

1Insert a Video CD. (Playback will start automatically.)

2Press the STOP button.

3Enter track number of your choice with the Number buttons.

¡A “prohibited icon” may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD/VCR or the disc.

4 PBC is now cancelled and the playback of the Video CD will start.

– 23 –

EN

1L25

Page 22 Page 24
Image 23
Page 22 Page 24
Contents AXWD2002 Laser Safety Important Safeguards About Copyright Supplied AccessoriesSymbols Used in this Manual Indice Table of ContentsDVD Mode FeaturesVCR Mode PrecautionsFollowing discs cannot be played back on this DVD/VCR About the DiscsPlayable Discs ExampleOperating Controls and Functions +100 Button Press to change TV channels on the DVD/VCR Press to select VCR mode for the remote controlPress to skip Chapters or Tracks Loading the Batteries DisplaySwitching to VCR Mode Switching to DVD Mode VCR/DVD SwitchingDVD/VCR to TV Connection SwitchConnecting to a TV HookupsFor TVs with Component Video in Jacks Dolby Digital DTS decoder To Select a Desired Channel SetupAutomatic Channel SET UP To Preset the Channels Again¡To go back one step, press the REW button Clock SET UPTo Change the ON-SCREEN Language To ADD/DELETE ChannelsSearch Functions Playback FunctionNormal Playback Auto Repeat PlaybackAccidental Erasure Prevention Timer RecordingRecording Function Viewing and Recording Same ProgramTo Clear a Program Hints for Timer RecordingTo Stop AN Automatic Timer PRO- Gram Already Started To CHECK, CORRECT, or Cancel AN Automatic Timer ProgramTo Monitor the Recording Special FeaturesCopying a Video Tape Playing a DVD Video Video CD, or AN Audio CD Using the DVD MenusPlaying a Disc Auto RewindStepping Through Frames Using the Title MenuResuming Playback from Point Where Playback Stopped Pausing Playback or Displaying a Still PicturePlaying from a Desired Title or a Chapter Fast FORWARD/REVERSESlow Motion Starting from a Desired TrackCall back the marker Starting from a Desired Time CountMarker Set the marker¡The selected section will be Played back repeatedly RepeatYou can define a section to be played back repeatedly ¡The starting point a will then be Repetir SelectedTo Clear the Program Zoom PlaybackPlaying AN MP3 Disc When a Track is selectedWhen an Album is selected Playing AN MP3 Disc Randomly ¡The random setting menu screen will appearPlaying a Desired Track From AN MP3 Disc Playing AN MP3 Disc in a Program¡The current audio status will appear at the top SettingsChanging the Audio Language or Sound Mode Changing the Camera Changing the Subtitle Language¡Use the Number button to start from the desired chapter Black Level Settings¡The setup screen is displayed Changing the ON-SCREEN DisplayLanguage Settings Changing the Setup Items¡The setup screen will appear Display SettingsWhen playing a disc with copyright protection Audio SettingsAll parental lock is cancelled When Parental Level is selectedLanguage Country code Language Code ListProblem Corrective Action Troubleshooting GuideDisc Handling Handling PrecautionsSpecifications Memo Memo H9201MD 0VMN03350
Top Page Image Contents