Operating Controls and Functions

6. TIMER SET Light [page 20]

This light glows when the DVD/VCR is in standby mode or off for a timer recording or during a One- Touch Recording. It flashes if the TIMER SET but- ton is pressed for a timer recording, but there is no tape in the DVD/VCR. It flashes when all timer recordings or One-Touch Recordings are finished.

1. Disc loading tray

2. DVD OUTPUT Light (Green) [page 13]

This light appears when the DVD output mode is select- ed. You can only watch DVDs when the green DVD OUTPUT Light is on. To make the green DVD OUT- PUT light come on, press the DVD button on the remote control or the OUTPUT button on the front panel.

3. VCR OUTPUT Light (Green) [page 13]

This light appears when the VCR output mode is select- ed. You can only watch tapes when the green VCR OUTPUT light is on. To make the green VCR OUTPUT light come on, the VCR button on the remote control or the OUTPUT button on the front panel.

4. CASSETTE COMPARTMENT

5. REC/OTR Light [page 20] Lights up during recording.

SUBTITLE ANGLE REPEAT A-B

MODE ZOOM SEARCH CLEAR/

MODE C.RESET

FRONT PANEL	1

7 8 9

REMOTE CONTROL 26

	DVD OPERATION
OPEN/CLOSE	STOP SKIP/REV PLAY FWD/SKIP

OUTPUT

25	23	21
24	22	20

				POWER
				VIDEO
VCR OPERATION			CHANNEL
VCR OPERATION			TIMER	L
			TIMER	L
			SET
			VCR/TV	AUDIO
			VCR/TV
STOP/EJECT REW	PLAY	F.FWD REC/OTR	CST.IN	R

19	17	15	13	11
18	16		14 12	10

27	SPEED	AUDIO
POWER	SPEED	AUDIO
28
1	2	3
			SKIP/CH.
4	5	6
29			VCR/TV
7	8	9
		+100	SLOW
	0	+10
DISPLAY	DVD	VCR	PAUSE

30
31	PLAY
32	STOP
33	STOP
33
34	RECORD
34
35	MENU
35	ENTER
36	SETUP TITLE	RETURN
37
38
39

7.POWER Button [page 17]

56Press to turn the power on and off.

8.POWER Light

Lights up when the power is on.

559. VIDEO In Jack

Connect a video cable coming from the video out jack of a camcorder, another VCR, or a video source

54(laser disc player, camcorder, etc.) here.

10.AUDIO In Jacks

53			Connect audio cables coming from the audio out jacks
	52		of a camcorder, another VCR, or an audio source here.
		11.	TIMER SET Button [page 21]
51
	50		Press to put the DVD/VCR into standby mode for a

49			timer recording.

		12.	CST IN Light [page 19]

Lights up when a cassette is in the DVD/VCR.

4813. VCR/TV Light [page 17]

47		Lights up when the DVD/VCR is in the VCR posi-
47		tion, and goes off when it is in the TV position.
46	14.	CHANNEL Buttons [page 17]
46		In VCR mode, press to change TV channels on the
45		In VCR mode, press to change TV channels on the
45		DVD/VCR; press to adjust the tracking during nor-
44		mal or slow motion playback; press to remove verti-
43		cal jitter in a Still picture.
42	15.	REC/OTR Button (VCR) [page 20]
		Press once to start a recording. Press repeatedly to
		start a One-Touch Recording.
	16. F.FWD Button (VCR) [page 17]
		Press to rapidly advance the tape, or view the picture
		rapidly in forward during playback. (Forward
		Search). When setting program (For example:setting
		clock or timer program), press to determine your
		selection and proceed to the next step you want to
		input. Press to determine the setting modes from the
		on screen menu. Press to add or delete channel num-
		bers during channel preset.
	17. PLAY Button (VCR) [page 17]
		Press to begin playback. Press to enter digits when
		setting program (For example: setting clock or timer
		program). Press to select the setting modes from the
		on screen menu.
	18. REW Button (VCR) [page 18]
		Press to rewind the tape, or to view the picture rapid-
		ly in reverse during the playback mode (Rewind
		Search). Press to cancel a setting of timer program.
		Press to correct digits when setting program (For
		example: setting clock or timer program). Press to
		add or delete channel numbers during channel preset.
	– 9 –	EN

1L25