FUNAI FDRV90E owner manual Others, Troubleshooting, 101

Page 101

Others

Troubleshooting

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.

Symptom

Remedy

Power

 

The power does not turn on.

• Check that the AC power cord is connected securely.

 

 

Before you start Connections

Picture

There is no picture.

•Re-connect the connecting cord securely.

•The connecting cords are damaged.

•The Setup Display appears. Press SETUP or RETURN button to turn off the display.

•Check the connection to your TV (page 13).

•Check the RF output channel when you view a TV program using RF connection.

•Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See page 13.

•Switch the input selector on your TV (such as to "LINE1") so that the signal from this unit appears on the TV screen.

Getting started

Picture noise appears.

• The disc is dirty or flawed.

 

• Head cleaning for VCR may be necessary.

 

Refer to “AUTO HEAD CLEANING”.

 

• If the picture output signal from the unit passes through your VCR

 

to get to your TV, or if you are connected to a combination

 

TV/VIDEO player, the copy-protection signal applied to some DVD

 

programs could affect picture quality. If you still experience this

 

problem even when you connect the unit directly to your TV, try

 

connecting the unit to your TV's S-VIDEO input.

 

• Adjust tracking control for better picture by pressing

 

CHANNEL (o / p) buttons on this unit or CH ( o / p)

 

buttons while you are playing a video tape.

 

 

TV program reception does not fill the

• Try to set the channels with "Auto Preset" in SETUP menu

screen.

(page 18).

 

• Select a channel of any TV program using the CH o / p buttons.

 

• Press VIDEO/TV button if necessary.

 

 

TV program pictures are distorted.

• Adjust TV antenna.

 

• Adjust the picture (see the TV's instruction manual).

 

• Place the unit and TV farther apart.

 

• Place the TV and any bunched antenna cables farther apart.

 

 

TV channels cannot be changed.

• Switch the input to TV.

 

• Connect the antenna cable correctly (page 13).

 

 

The playback picture or TV program from

• If the playback picture output from a DVD player,VCR, or tuner

the equipment connected through the

goes through the unit before reaching your TV, the copy-

unit is distorted.

protection signal applied to some programs could affect picture

 

quality. Disconnect the playback equipment in question and

 

connect it directly to your TV.

Sound

 

There is no sound.

• The disc is dirty or flawed.

 

• Re-connect all connections securely.

 

• The connecting cord is damaged.

 

• Check the connections to the amplifier input.

 

• The input source setting on the amplifier is incorrect.

 

• The unit is in pause mode or in Slow-motion Play mode.

 

• The unit is in fast forward or fast reverse mode.

 

• If the audio signal does not come through the DIGITAL AUDIO

 

OUT jacks, check the Audio Setup settings (pages 94-95).

 

 

Sound is noisy.

• The disc is dirty or flawed.

 

 

 

 

Recording Playing discs Editing Changing the SETUP menu VCR functions Others Español Français

101

Page 100 Page 102
Image 101
Page 100 Page 102
Contents Remote control RF cable Supplied AccessoryNA817UD WPZ0901TM002 With two AA batteriesLaser Safety PrecautionsBefore you start Model No Serial NoPrecautions cont’d Important SafeguardsMaintenance Installation LocationMoisture Condensation Warning About CopyrightTable of contents Features 2221201918 1211 Functional overviewPower button DVD/VCR Skip H button DVD Setup button DVD/VCRSearch Mode button VCR CLEAR/C.RESET button60˚ Remote control VCR/DVD recorder SwitchingFunctional overview cont’d Select buttonSETUP/DISC/CD menu First VCR Display menuFirst DVD Disc type and Current status of the unit Display messageRecording speed Title/Track and Chapter markMethod 2 and method 3 are only useful in DVD mode Plug in the AC power cord of this unitConnections Connection to a TVTo select channels of the cable box or satellite box Connection to a cable box or satellite boxTo playback a DVD disc or a tape To view one channel while recording anotherConnection to an Audio System Easy DVD recording Getting startedChannel Discs Easy DVD recording Cont’dGetting channels auto- matically Channel settingSelect Manual Preset using Buttons, then press Enter button Channel setting cont’dManual Preset menu will appear Select Channel using K / L Buttons, then press Enter buttonRemember Guide channel settingAssign channel numbers to the guide channels as neces- sary Guide Channel Setting list will AppearTo continue assigning, repeat the steps To erase a TV channel, press button at stepOption window will appear Selecting the TV stereo or SAPOutputs main-audio Secondary Audio ProgramAuto Clock Setting Clock settingManual Clock Setting Clock setting cont’dClock menu will appear, then the settings will be activated Select on or OFF using Buttons, then press Enter button Setting the daylight sav- ing timeChoose on when currently observing the daylight saving time Daylight Saving Time options will appearSelect TV Aspect using K Buttons, then press Enter Letter Box has been select- ed as the defaultSelecting the TV aspect ratio Playback menu will appearInformation on DVD recording RecordingInformation Recording speedInformation on copy control Information on DVD recording cont’dMaking discs playable in other DVD player Finalize This unit cannot record CD-R or CD-RW discsSETUP/DISC menu will appear Screen Settings for the recording format to a blank discSelect Setup using / B Formatting a discPress Setup button to exit Setup menu Select Auto Chapter usingFormatting a disc cont’d Option window will appearSelect Format using K / L buttons, then press Enter button Select Yes using / B but- tons, then press Enter but- tonReformatting a disc Formatting is completeBasic recording Checking the recording picture quality Basic recording cont’dXP SP LP Press REC Monitor button again to exitOne-touch timer recording Timer recording Press Enter button when all information required is entered Timer recording cont’dPress Power button to turn off To stop the timer recording in processPriority of overlapped settings Hints for timer recordingRecord using K / L buttons When the Guide channel hasBefore setting timer recording Using VCR Plus+ system, read Guide channel setting on pages 20-21Select L1 Rear using K / L buttons, then press Enter button Settings for an external sourceConnection to an external source If you want to use Video input Composite, select VideoSelect a recording speed using REC Speed button. Refer to Settings for an external source cont’dRecording from an external source Recording speed on page 28 for DVD or page 98 for VCRMake sure Dubbing ModeSelect Dubbing Mode using Buttons, then press Enter button After setting the Dubbing When you turn off the unitMode to Setting will be set toFinalizing is complete Select Disc using / B buttons, then press Enter buttonFinalizing the discs Setting a disc to protect Information on DVD play Playing discsPlayback Basic playbackFor MP3 playback Basic playback cont’dPlaying discs using the disc menu First DVD Press TOP Menu button Playing discs using the title menuTOP Menu button Press TOP Menu button to exit the title menuFast forward / Fast reverse Special playbackResume play Pause Special playback cont’dSkipping TV commercials during play Slow forward / Slow reverse play Step by step playbackSelect icon using / B buttons, then press Enter button Spatializer setting Virtual surroundZoom During playback, press Zoom buttonThen press CLEAR/C.RESET Marker setup menu will appear. Screen for DVDScreen for CD Recording to a recordableUsing Display button Using Skip H / G buttonsSearch Title/Chapter searchSearch cont’d Enter a desired time to search using K / L buttons orTrack search Time searchRandom play Repeat/Random/Program playRepeat play Program play Repeat/Random/Program play cont’dDVD-RW VR mode Switching audio soundtrackAudio channel will switch Selecting the format of audio and videoSelecting the format of audio and video cont’d Switching subtitlesAngle will switch each time you press Enter button Switching camera anglesReducing block noise NR menu will appearEditing Editing discs in Video modeInformation on disc editing Guide to a title listInformation on disc editing cont’d Editing discs in VR modeEditing original titles Editing playlistsDeleting titles Editing DVD-RW discs in Video modeTitlelist will appear Screen Edit menu will appearSelect Edit using K / L but Editing DVD-RW discs in Video mode cont’dPutting names on titles Tons, then press Enter buttonActivated for the title Select Yes using / B but Tons, then press Enter butName you entered will be Chapter markers will be added at the specified time Setting or clearing chapter markersSelect Chapter Mark using Buttons, then press Enter button Editing DVD-RW discs in VR mode Original Select Scene Delete using Buttons, then press Enter button Editing DVD-RW discs in VR mode Original cont’dSelect Original using / B buttons, then press Enter button Deleting parts of titlesButton Ton Delete when the numberOption window will appear Part of a title will be deleted You cannot select SceneName you entered will be activated for the title Yes JAN/ 1 100AM CH12 Option window will appear. AddDelete Setting pictures for thumbnailsDelete Chapter marker which you Selected will be deletedPicture for thumbnail will be set To prevent accidental editing or Setting titles to protectThem from the original menu Buttons, then press First Original menu will appearReleasing titles from protecting Playlist will appear Editing DVD-RW discs in VR mode PlaylistSelect PlayList using / B buttons, then press Enter button Instructions continue to the next Editing DVD-RW discs in VR mode Playlist cont’dPlaylist menu will appear Before editing EditedPart of a title will be deleted Select Delete using K / L buttons, then press Enter buttonButtons, then press Tons, then press Enter but Select a desired title using K Select Yes using / B butEnter button Ton Playlist menu will appear Name you entered will beDisc Setting Chapter marker will be added. Add Open Powerclose Original/PlayList menu will appear Screen Select Edit using K / L but- tons, then press Enter but TonAdding titles to a Playlist Playlist can be deleted if no longer needed Deleting a PlaylistPlaylist will be erased Ing time on discYou cannot select Chapter Mark Editing DVD-R discsEditing DVD-R discs cont’d Select Yes using / B but- tons, then press Enter but TonTour of the Setup menu Changing the Setup menuPress Setup button to display SETUP/DISC menu Settings for LanguageSETUP/DISC menu will appear Only the languages supported by the disc can be selectedSettings for Language cont’d Setup Display Settings for DisplayOSD Background Transparency Default 35% Settings for Display cont’dOSD Language Default English Screen Saver Default 10 minutesChoose the appropriate Audio settings for your equipment Settings for AudioSelect Playback using K / L / / B buttons, then press It will only affect DVD discs during playbackSelect a setting using K / L buttons, then Settings for Audio cont’dDynamic Range Control Default on Fast Forward with Audio Default OFFSettings for Parental lock level Settings for Parental lock level cont’d Press Stop button when the recording is completed Recording and One-touch timer recording VCR functions PlaybackOne-touch timer recording Recording and One-touch timer recording cont’dIndex search You cannot pause an OTRWhen you playback a tape recorded in Hi-Fi stereo Counter ResetOther operations VCR First101 TroubleshootingOthers 102 Troubleshooting cont’d103 RF converter output Press VIDEO/TV button on the remote controlSelect channel 3 on your TV For more than105 Language codeGlossary 107 SpecificationsFácil grabación de DVD EspañolNota Mando a distancia¿Qué son títulos y capítulos? Grabe en discosPuede editar lo siguiente de la lista de títulos Original y Playlist modo VRPresione VCR Reproducción con videograbadoraGrabación con temporizador de un toque OTR Grabación y grabación con temporizador de un toque VCRGrabación Français TélécommandeEnregistrement simple de DVD Sélectionner la vitesseEnregistrement simple de DVD suite 114 Lecture avec magnétoscopeEnregistrement Limited Warranty
Top Page Image Contents