FUNAI FDRV90E RF converter output, Select channel 3 on your TV, For more than, Seconds

Others

Troubleshooting (cont’d)

Error message

Recording Error

Disc is full.

(No area for new recording)

Cause

You are trying to record onto the disc which has no space for recording.

Solution

Insert the recordable disc with enough recording space.

Recording Error

You cannot record more than 99 titles on one disc. (The maximum is 99)

You are trying to record onto the	Delete unnecessary titles
disc on which the number of	(pages 65, 69, 78).
recording titles comes up to the
maximum (99).

Recording Error

You cannot record more the 999 chapters on one disc.

(The maximum is 999)

You are trying to record onto the	Delete unnecessary chapter
VR mode DVD-RW disc on which	markers (pages 73, 82).
the number of recording chapters
comes up to the maximum (999).

Recording Error

You cannot record on this disc as Control Information is full.

This disc has no space to write	Delete unnecessary titles
the Control Information when	(pages 65, 69, 78).
recording or deleting contents.
When editing has been repeatedly
performed, the control Information
area may come up to be full even
the recording area has enough space.

Recording Error

You cannot record on the disc as Power Calibration Area is full.

This disc's working area for	Insert a new disc.
recording is full.

When recordings are performed repeatedly onto an unstable disc, this area may come up to be full.

Recording Error

This disc is already finalized.

You are trying to record onto the disc already finalized.

Release the finalizing for this disc (page 44).

*If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the error description for calling our help line mentioned on the front page to locate an Authorized service center.

RF converter output

You can watch the TV programs with the tuner of the unit. (Usually channel 3 or 4 of the TV is available for the RF converter setting.) Be sure to connect the unit to a TV using the RF cable. Refer to page 13.

1

Select channel 3 on your TV.

• Be sure that the unit is in DVD mode.

2

Press VIDEO/TV button on the remote control.

•If noise appears, change the RF output channel of the unit to CH 4 by pressing VIDEO/TV but- ton for 3 seconds.The RF output channel will alternate between CH3 and CH4 as follows.

•Changing the RF output channel is available only when the unit is in DVD mode.

			POWER				OPEN/
							CLOSE
VCR	VIDEO/TV	DVD
SLOW	REC	REC/OTR	VCR Plus+		.@/:	ABC	DEF
	SPEED
SKIP		CH	SEARCH		GHI	JKL	MNO
			MODE
			CM SKIP		PQRS	TUV	WXYZ
for more than			ZOOM			SPACE
3 seconds			CLEAR/		REC	AUDIO	DISPLAY
			C.RESET	MONITOR
			MENU/LIST				TOP MENU
		3 seconds
(RF ON) CH4
		3 seconds	RETURN				SETUP	2
(RF ON) CH3			VCR		VIDEO/TV		DVD
		3 seconds	SLOW		REC
					SPEED REC/OTR
(RF ON) CH4			SKIP				CH
		3 seconds		STOP		PLAY
			REW				FWD
					PAUSE

104