Extron electronic DVI DL 101 Mounting with the projector pole on the inside, PMK 350 mounting

Page 11

Installation and Operation, cont’d

Contoured

Bracket

Base

 

Extron

 

DVI DL 101

 

Equalizer

 

Power Supply

 

Extron

U-bolt

PMK 300

Multi-product Projector

 

 

Mount Kit

Mounting with the projector pole on the inside

4. Place the contoured bracket brace against the pole and opposite the back plate. The pole should fit snugly into the depression in the center of the bracket brace.

5. Place the U-bolt around the ceiling pole. Insert the two legs of the U-bolt through the round holes on the contoured bracket brace and then through the slotted holes on the bracket’s mounting plate.

NThe supplied U-bolt fits a typical (1.5" to 2.0" diameter) ceiling pole.

6. Secure the bracket to the U-bolt with the included hex nuts, washers, and lock washers. Tighten the hex nuts just enough that they can be loosened by hand.

PMK 350 mounting

Mount the DVI DL to a PMK 350 bracket as follows:

1. Remove the front and rear plates from the PMK 350, using an Extron Tweeker or a #2 Philips screwdriver. Retain the screws to reattach the plates when you are finished.

2. If necessary, remove the feet from the bottom of the unit.

3. Secure the DVI DL to one side of the mounting tray, using two of the supplied 4-40 x 3/16” screws in opposite (diagonal) corners.

 

Extron

Rear Plate

DVI DL 101

 

Equalizer

 

Contoured

 

Base

 

L-shaped

 

Bracket

Extron

U-bolt

PMK 350

 

Multi-product Projector

Mounting Kit

Extron

Power Supply

Front Plate

Cover Sheet

PMK 350 projector mounting a DVI DL

4. Using the two included tie wraps, strap the power supply to the PMK bracket.

5. If desired, remove the back panel of the PMK 350 and mount additional device(s) at the back of the bracket, as described in step 3.

6. Place the PMK 350 around the projector ceiling mounting pole.

2-8

DVI DL 101 • Installation and Operation

DVI DL 101 • Installation and Operation

2-9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Dual Length DVI Cable Equalizer User’s ManualExtron’s Warranty PrecautionsFCC Class a Notice 安全须知 中文Table of Contents DVI DL Table of Contents, cont’dAbout this Manual FeaturesApplication Diagrams IntroductionIntroduction, cont’d TwoRack mounting Installation and OperationMounting the DVI DL Tabletop useMounting the DVI DL 101 on a 3.5 deep rack shelf Installation and Operation, cont’dUnder-furniture mounting Through-furniture mountingPMK 300 projector mounting a receiver Projector mountingThrough-desk mounting the DVI DL PMK 300 mountingPMK 350 projector mounting a DVI DL Mounting with the projector pole on the insidePMK 350 mounting DVI DL front and rear panels Front and Back Panel Features and ConnectionsDual and single link modes Signal PinDVI connector pin assignments Input cable lengthsEnabling the DDC Buffer Wiring the power connectorJumpers on the internal board in default outside position AAppendix a Specifications DVI DL Specifications, Parts, and AccessoriesCables and Adapters Optional AccessoriesIncluded parts Replacement Part number Accessories Part numberSpecifications, Parts, and Accessories, cont’d

DVI DL 101 specifications

Extron Electronics DVI DL 101 is a state-of-the-art digital video distribution amplifier designed to provide superior performance in professional environments. This powerful device is particularly well-suited for applications requiring high-quality DVI signal distribution, making it an ideal choice for educational institutions, corporate settings, and broadcast studios.

One of the standout features of the DVI DL 101 is its ability to distribute a single DVI-D signal to multiple displays without any loss of quality. With a single input and up to two DVI outputs, this device ensures that all connected displays receive the same high-quality image. The DVI DL 101 supports video resolutions up to 1920x1200 at a refreshing rate of 60 Hz, making it suitable for HD video applications.

The DVI DL 101 utilizes advanced signal processing technologies, including reclocking and equalization. Reclocking helps to regenerate the digital signal to eliminate any potential distortion that may occur over long cable runs. Meanwhile, equalization adjusts the signal strength to compensate for cable length and quality. Together, these technologies enhance the overall integrity of the digital signals, ensuring consistent and reliable performance across all outputs.

In terms of connectivity, the DVI DL 101 features a DVI-D input and two DVI-D outputs, accommodating various cable configurations. Additionally, the device is designed with a compact and durable chassis, making it easy to integrate into various rack-mounted setups or standalone configurations. The front panel includes LED indicators, providing users with real-time status updates on the power and signal presence.

Another characteristic of the DVI DL 101 is its ease of installation and user-friendly operation. With its plug-and-play functionality, users can quickly set up the device without the need for complex programming or configuration. Furthermore, the DVI DL 101 is compatible with a wide range of DVI sources, including computers, projectors, and digital signage systems.

Overall, the Extron DVI DL 101 is an exceptional choice for any professional environment needing reliable and high-quality DVI signal distribution. With its robust set of features, advanced signal processing technologies, and ease of installation, it stands out as a premier solution for enhancing digital video systems.
Top Page Image Contents