Extron electronic DVI DL 101 Installation and Operation, cont’d, Under-furniture mounting

Page 9

Installation and Operation, cont’d

VersaTools Rack Shelf

1/4 Rack Width Front

False Faceplate

Use 2 mounting holes on

opposite corners.

(2) 4-40 x 3/16" Screws

Mounting the DVI DL 101 on a 3.5” deep rack shelf

Under-furniture mounting

The DVI DL can be mounted under a horizontal surface using an optional MBU 125 under-desk mounting kit (part #70-077-01), as follows:

1. If rubber feet were previously attached to the bottom of the unit, remove them.

2. Remove the screws from one side of the unit. Retain the screws for possible later reassembly.

3. Attach one bracket to the side of the unit, using the provided machine screws (see the illustration on the next page).

4. Repeat steps 2 and 3 on the other side of the DVI DL.

5. Hold the unit with the attached brackets against the underside of the table or other furniture. On the mounting surface, mark the location of the bracket’s screw holes.

Under-furniture mounting the DVI DL

6. Drill 3/32" (2 mm) diameter pilot holes, 1/4" (6.3 mm) deep in the mounting surface at the marked screw locations.

7. Insert #8 wood screws into the four pilot holes. Tighten each screw into the mounting surface until slightly less than 1/4" of the screw head protrudes.

8. Align the mounting screws with the slots in the brackets and place the unit against the surface, with the screws through the bracket slots.

9. Slide the unit slightly forward or back, then tighten all four screws to secure it in place.

Through-furniture mounting

The DVI DL can be mounted through a desk or other furniture using an optional Extron MBD 129 through-desk mounting kit (part #70-077-02)as follows:

1. Loosely attach the mounting brackets to the unit using the four machine screws and washers supplied with the mounting kit.

2. Hold the unit against the inside of the surface through which it will be mounted. Mark the four screw holes on the inside of the surface to which you are mounting the device.

3. Cut out the material from the installation area with a jigsaw.

2-4

DVI DL 101 • Installation and Operation

DVI DL 101 • Installation and Operation

2-5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Dual Length DVI Cable Equalizer User’s ManualExtron’s Warranty PrecautionsFCC Class a Notice 安全须知 中文Table of Contents DVI DL Table of Contents, cont’dApplication Diagrams FeaturesIntroduction About this ManualIntroduction, cont’d TwoMounting the DVI DL Installation and OperationTabletop use Rack mountingUnder-furniture mounting Installation and Operation, cont’dThrough-furniture mounting Mounting the DVI DL 101 on a 3.5 deep rack shelfThrough-desk mounting the DVI DL Projector mountingPMK 300 mounting PMK 300 projector mounting a receiverMounting with the projector pole on the inside PMK 350 mountingPMK 350 projector mounting a DVI DL DVI DL front and rear panels Front and Back Panel Features and ConnectionsDVI connector pin assignments Signal PinInput cable lengths Dual and single link modesWiring the power connector Jumpers on the internal board in default outside positionEnabling the DDC Buffer AAppendix a Specifications DVI DL Specifications, Parts, and AccessoriesIncluded parts Replacement Part number Optional AccessoriesAccessories Part number Cables and AdaptersSpecifications, Parts, and Accessories, cont’d

DVI DL 101 specifications

Extron Electronics DVI DL 101 is a state-of-the-art digital video distribution amplifier designed to provide superior performance in professional environments. This powerful device is particularly well-suited for applications requiring high-quality DVI signal distribution, making it an ideal choice for educational institutions, corporate settings, and broadcast studios.

One of the standout features of the DVI DL 101 is its ability to distribute a single DVI-D signal to multiple displays without any loss of quality. With a single input and up to two DVI outputs, this device ensures that all connected displays receive the same high-quality image. The DVI DL 101 supports video resolutions up to 1920x1200 at a refreshing rate of 60 Hz, making it suitable for HD video applications.

The DVI DL 101 utilizes advanced signal processing technologies, including reclocking and equalization. Reclocking helps to regenerate the digital signal to eliminate any potential distortion that may occur over long cable runs. Meanwhile, equalization adjusts the signal strength to compensate for cable length and quality. Together, these technologies enhance the overall integrity of the digital signals, ensuring consistent and reliable performance across all outputs.

In terms of connectivity, the DVI DL 101 features a DVI-D input and two DVI-D outputs, accommodating various cable configurations. Additionally, the device is designed with a compact and durable chassis, making it easy to integrate into various rack-mounted setups or standalone configurations. The front panel includes LED indicators, providing users with real-time status updates on the power and signal presence.

Another characteristic of the DVI DL 101 is its ease of installation and user-friendly operation. With its plug-and-play functionality, users can quickly set up the device without the need for complex programming or configuration. Furthermore, the DVI DL 101 is compatible with a wide range of DVI sources, including computers, projectors, and digital signage systems.

Overall, the Extron DVI DL 101 is an exceptional choice for any professional environment needing reliable and high-quality DVI signal distribution. With its robust set of features, advanced signal processing technologies, and ease of installation, it stands out as a premier solution for enhancing digital video systems.
Top Page Image Contents