Extron electronic DVI DL 101 Installation and Operation, Mounting the DVI DL, Tabletop use

Page 8

Installation and Operation

Mounting the DVI DL 101

The DVI DL can be mounted on a rack shelf, under or through furniture, attached to a projector pole, or placed on a table top.

Tabletop use

Four self-adhesive rubber feet are included with the DVI DL. For tabletop use, attach one foot at each corner on the bottom surface of the unit.

Rack mounting

The optional accessories available for rack mounting the DVI DL include the following:

•RSF 123 — 3.5" deep 1U VersaTools® rack shelf kit (part #60-190-20)

•RSB 123 — 3.5" deep 1U VersaTools rack shelf (part #60-604-20)

•RSU 126 — 6" deep 1U universal rack shelf kit (part #60-190-10)

•RSB 126 — 6" deep 1U basic rack shelf (part #60-604-10)

•RSU 129 — 9.5" deep 1U universal rack shelf kit (part #60-190-01)

•RSB 129 — 9.5" deep 1U basic rack shelf (part #60-604-01)

UL rack mounting guidelines

The following Underwriters Laboratories (UL) requirements pertain to the installation of the DVI DL 101 into or onto a rack.

1. Elevated operating ambient — If the equipment is installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consider installing the equipment in an environment compatible with the +122 °F (+50 °C) maximum ambient temperature (Tma) specified by Extron.

5. Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as the use of power strips).

Rack mounting procedure

On the 6" deep and 9.5" deep rack shelves, the unit can be mounted in the front or the rear of the rack.

1. If rubber feet were previously installed on the bottom of the unit, remove them.

2. Secure the DVI DL on the rack shelf, using two 4-40 x 3/16" screws in opposite (diagonal) corners.

3. Install blank panel(s) or other unit(s) on the rack shelf as desired.

4. Insert the shelf into the rack, aligning the holes in the shelf with those of the rack.

5. Secure the shelf to the rack using the supplied machine screws. This shelf can be mounted in the front or in the rear of the rack.

1U Universal Rack Shelf

2. Reduced air flow — Install the equipment in the rack so that the amount of air flow required for safe operation of the equipment is not compromised.

3. Mechanical loading — Mount the equipment in the rack so that uneven mechanical loading does not lead to a hazardous condition.

Use 2 mounting holes on opposite corners.

(2) 4-40 x 3/16" Screws

4. Circuit overloading — When connecting the equipment to the supply circuit, consider the connection of the equipment to the supply circuit and the effect that circuit overloading might have on overcurrent protection and supply wiring. Consider equipment nameplate ratings when addressing this concern.

Mounting the DVI DL 100 on a standard rack shelf

2-2

DVI DL 101 • Installation and Operation

DVI DL 101• Installation and Operation

2-3

Page 7 Page 9
Image 8
Page 7 Page 9
Contents User’s Manual Dual Length DVI Cable EqualizerPrecautions Extron’s Warranty安全须知 中文 FCC Class a NoticeTable of Contents Table of Contents, cont’d DVI DLFeatures Application DiagramsIntroduction About this ManualTwo Introduction, cont’dInstallation and Operation Mounting the DVI DLTabletop use Rack mountingInstallation and Operation, cont’d Under-furniture mountingThrough-furniture mounting Mounting the DVI DL 101 on a 3.5 deep rack shelfProjector mounting Through-desk mounting the DVI DLPMK 300 mounting PMK 300 projector mounting a receiverPMK 350 projector mounting a DVI DL Mounting with the projector pole on the insidePMK 350 mounting Front and Back Panel Features and Connections DVI DL front and rear panelsSignal Pin DVI connector pin assignmentsInput cable lengths Dual and single link modesEnabling the DDC Buffer Wiring the power connectorJumpers on the internal board in default outside position AAppendix a Specifications, Parts, and Accessories Specifications DVI DLOptional Accessories Included parts Replacement Part numberAccessories Part number Cables and AdaptersSpecifications, Parts, and Accessories, cont’d

DVI DL 101 specifications

Extron Electronics DVI DL 101 is a state-of-the-art digital video distribution amplifier designed to provide superior performance in professional environments. This powerful device is particularly well-suited for applications requiring high-quality DVI signal distribution, making it an ideal choice for educational institutions, corporate settings, and broadcast studios.

One of the standout features of the DVI DL 101 is its ability to distribute a single DVI-D signal to multiple displays without any loss of quality. With a single input and up to two DVI outputs, this device ensures that all connected displays receive the same high-quality image. The DVI DL 101 supports video resolutions up to 1920x1200 at a refreshing rate of 60 Hz, making it suitable for HD video applications.

The DVI DL 101 utilizes advanced signal processing technologies, including reclocking and equalization. Reclocking helps to regenerate the digital signal to eliminate any potential distortion that may occur over long cable runs. Meanwhile, equalization adjusts the signal strength to compensate for cable length and quality. Together, these technologies enhance the overall integrity of the digital signals, ensuring consistent and reliable performance across all outputs.

In terms of connectivity, the DVI DL 101 features a DVI-D input and two DVI-D outputs, accommodating various cable configurations. Additionally, the device is designed with a compact and durable chassis, making it easy to integrate into various rack-mounted setups or standalone configurations. The front panel includes LED indicators, providing users with real-time status updates on the power and signal presence.

Another characteristic of the DVI DL 101 is its ease of installation and user-friendly operation. With its plug-and-play functionality, users can quickly set up the device without the need for complex programming or configuration. Furthermore, the DVI DL 101 is compatible with a wide range of DVI sources, including computers, projectors, and digital signage systems.

Overall, the Extron DVI DL 101 is an exceptional choice for any professional environment needing reliable and high-quality DVI signal distribution. With its robust set of features, advanced signal processing technologies, and ease of installation, it stands out as a premier solution for enhancing digital video systems.
Top Page Image Contents