GoVideo DV2140 manual Operation with tape, Checking Erasing the Timer Program, Program Priority

Page 23

Operation with tape (Continued)

Use V to choose the SPEED option.

10 Use b/B to choose the desired recording speed (AUTO, SP or SLP).

AUTO mode determines how long tape is left and switches speed from SP to SLP, if necessary, to complete recording the program. There will be some picture and sound distortion at the point of the speed change.

Use V to choose the REPEAT option.

11 Use b/B to choose the desired repeat (ONCE, WEEKLY or DAILY).

ONCE event....for recording up to 8 programs on a

single day or over the days within a period of 1 year. WEEKLY event....for recording up to 8 programs on a

certain day of every week.

DAILY event....for recording up to 8 programs at the

same time(s) from Monday through Friday.

Tip

If the input data is wrong, use v to select the data and correct it using b/B.

Press MENU, the program will be memorized

12 at the DVD+VCR.

indicator lights in the display window.

If the program preset time is past, the PAST TIME PROGRAMMED message will appear on the TV screen. Return to the incorrect program and program it with the correct time.

If you had entered a past date, the timer recording will be performed on that date of the next year. Additional programs may be entered by repeating steps 1-12.

Cable Users: If your cable hookup is via a TV convert- er box, you can program multiple recordings only on the converter box output channel. This is because the converter determines what channel you view through your DVD+VCR.

Tip

If you have finished programming and you want to set the DVD+VCR to record the programs you have entered.

MAKE SURE YOU HAVE INSERTED A TAPE INTO THE DVD+VCR. The DVD+VCR is now set to record the preset programs.

ote

If the power fails or the DVD+VCR is unplugged from the AC outlet, the correct clock time and timer settings are kept in memory for approximately 3 seconds. After 3 seconds, the clock and program timer will be reset when power is restored. Reset the clock according to instructions.

After setting up a timer recording, recording will start if no other timer recordings are scheduled to occur at the same time (see “Program Priority” at right).

Checking (Erasing) the Timer Program

Programming can be checked whenever the DVD+VCR is turned on.

1Press MENU and the MAIN menu will appear.

2Use v/V to choose the PROGRAM menu.

Press ENTER and the PROGRAM menu will appear.

3Use b/B to select a program you want to check or erase. If you want to erase the program, press

CLEAR.

4Press MENU to return to the TV screen.

Program Priority

If the starting and ending times of two or more timer recordings overlap on the

same day, priority is given to

the earliest recording. For

example, in the diagram at left Program number 2 will not be

recorded until Program number 1 is finished. The first part of Program number 2 will not be recorded. Likewise, Program number 3 will not be recorded until Program number 2 is finished, and so on.

OPERATION

23

Image 23
Contents Page Regulatory Information FCC Part Safety PrecautionsOtes on Copyrights Introduction Important Safety InstructionsTable of Contents Playable Discs Remote control battery installationRemote Control Operation Range Before UseSetting the Output Source PrecautionsAbout Symbols Front Panel REC Display WindowDVD Remote Control ANT.IN Antenna Input Rear PanelVideo OUT DVD OUT Digital Audio OUT Coaxial DVD OUTPreparation Connecting Antenna/Cable TV toConnections Optional, Preferred TV Connections Connections Basic TV ConnectionsA1A2 Accessory Audio/Video A/V Connections toDigital Multi-channel sound Rear of DVD+VCR OteMenu Selection VCR Operation Setup On-Screen Display OSDSetting the On-Screen Display Channel Selection VCR Operation Setup Setting the VCR Setup MenuManual Clock Set VCR Operation Setup Setting the ClockAuto Clock Set On-screen display operation DVD Operation SetupGeneral Explanation On-Screen DisplayDisplay DVD Operation Setup Initial SettingsInitial Settings General Operation LanguageOthers AudioLock Operation Operation with tape Normal PlaybackSpecial Effect Playbacks To record one TV program while watching another Timer RecordingOperation with tape Normal Recording To pause the recordingSame day, priority is given to Earliest recording. For Checking Erasing the Timer ProgramOperation with tape Program PriorityTo extend the Recording Time Instant Timer RecordingChecking the Recording Time TV screen Multichannel TV Sound Indicator MTSMTS Multi-Channel TV Sound SAP Second Audio Program RecordingAdditional Information VCR Operation with tape Tape Counter Memory FeatureOperation with DVD Playing DVD General FeaturesOperation with DVD General Features Additional Information DVD Operation with DVDTo stop playback at any other time Press Stop About MP3About WMA Windows Media Audio Repeat A-B CD Operation with Audio CD and MP3/WMA DiscsMoving to another Track CD MP3 Repeat Track/All/Off CD MP3 WMAInsert a disc and close the tray Operation with Photo Disc Viewing a Photo Disc JpegMoving to Another File To Rotate pictureErasing the Complete Program List Programmed Playback CD MP3Repeat Programmed Tracks Erasing a Track from Program ListSymptom Cause Correction TroubleshootingMoisture Condensation DVD+VCR is in Timer modeReference Video head clogging Troubleshooting Video Head CleaningVideo head cleaning Language Code Language Code ListCountry Code Country Code ListGeneral SpecificationsVCR Specifications DVD Specifications3834RV0009B