Specifications
General
Power requirements | AC 120V , 60 Hz |
Power consumption | 21W |
Dimensions (approx.) | 430 X 78.5 X 273 mm (16.9 x 3.1 x 10.8 inches) (w x h x d) |
Mass (approx.) | 4.0 kg (8.82 lbs) |
Operating temperature | 5˚C to 40˚C (41˚F to 104˚F) |
Operating humidity | 5 % to 90 % |
Signal system | NTSC |
Inputs
ANTENNA IN | 75 ohms (VHF/UHF/CATV) |
VHS VIDEO IN | 1 |
VHS AUDIO IN | |
Outputs |
|
VIDEO OUT | 1 |
(Y) 1.0 V | |
| (C) 0.286 V |
COMPONENT VIDEO OUT | (Y) 1.0 V |
| (Pb)/(Pr) 0.7 V |
Audio output (digital audio) | 0.5 V |
Audio output (analog audio) | 2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1 |
RF OUT | Channel 3 or 4 |
VCR Specifications
Head system | Four head helical scan azimuth system |
Timer | |
Tape speed | SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec |
Tape width | 12.7 mm |
Maximum recording time | SP: 2 HOURS |
Rewind time | About 3 minutes |
Channel coverage | VHF: |
Frequency range | 20Hz to 20kHz |
More than 43dB | |
Dynamic range | More than 88 dB |
Channel separation | More than 60 dB |
DVD Specifications
Laser system | Semiconductor laser, wavelength 650 nm |
Frequency response | DVD (PCM 96 kHz): 8 Hz to 44 kHz, DVD (PCM 48 kHz): 8 Hz to 22 kHz |
| CD: 8 Hz to 20 kHz |
More than 100dB (ANALOG OUT jacks only) | |
Harmonic distortion | Less than 0.008% |
Dynamic range | More than 95 dB (CD), More than 100 dB (DVD) |
Accessory:
Video cable x 1, Audio cable(L/R) x 1, RF
Design and specifications are subject to change without notice.
REFERENCE
39