GoVideo DV2140 manual Operation with DVD Playing DVD, General Features

Page 27

Operation with DVD

Playing DVD

Playback Setup DVD

Turn on the TV and select the video input source con- nected to the DVD+VCR.

Audio system: Turn on the audio system and select the input source connected to the DVD+VCR.

Set the Output Source to DVD as shown in “Setting the Output Source” on page 6.

1Press OPEN/CLOSE (Z) to open the disc tray.

2 Load your chosen disc in the tray, with the playback side down.

3Playback starts automatically. If playback does not start, press PLAY ( N ).

In some cases, the disc menu might appear instead.Press OPEN/CLOSE (Z) to close the tray.

If a menu screen is displayed

The menu screen may be displayed first after loading a DVD which offers a menu.

DVD

Use the b/B/v/V buttons to select the title/chapter you want to view, then press ENTER to start playback.Press TITLE or DISC MENU to return to the menu screen.

4This is RESUME STOP mode.

To exit RESUME STOP mode, press STOP again.To stop playback at any other time, press STOP.

otes

If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit password must be entered and/or the disc must be authorized (see “LOCK”, on page 20).

DVDs may have a region code.

Your DVD+VCR will not play discs that have a region code different from your DVD+VCR. The region code for this DVD+VCR is 1 (one).

Do not keep an image or on-screen displayed for a long time.

General Features

ote

Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.

Moving to another TITLE

DVD

 

 

 

 

1 / 3

 

 

 

 

 

 

When a disc has more than one title, you can move to another title as follows:

Press DISPLAY then press v/V to select the title icon. Then press the appropriate numbered button (0-9) to select a title number.

To go directly to any title at STOP mode

(or RESUME STOP mode), press the number button (0-9).

Moving to another CHAPTER

DVD

 

 

1 / 12

 

 

 

 

 

 

When a title on a disc has more than one chapter, you can move to another chapter as follows:

Press BACKWARD (.) or FORWARD (>) briefly during playback to return to the beginning of the current chapter or to select the next chapter.

Press BACKWARD (.) twice briefly to step back to the previous chapter.

To go directly to any chapter during playback, press DISPLAY. Then, press v/V to select chapter icon. Then, enter the chapter number using the numbered buttons (0-9).

Slow Motion DVD

1Press PAUSE/STEP (X) during playback. The DVD+VCR will now go into PAUSE mode.

2Press BACKWARD (.) or FORWARD (>) during pause mode.

The DVD+VCR will enter SLOW mode.

3Use BACKWARD (.) or FORWARD (>) to select the required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward).

4To return to playback, press PLAY ( N ).

Still Picture and Frame-by-Frame Playback

DVD

1Press PAUSE/STEP (X) during playback. The DVD+VCR will now go into PAUSE mode.

2You can advance the picture frame by frame by pressing PAUSE/STEP (X) repeatedly on the remote control.

3To return to playback, press PLAY ( N ).

Search DVD

1Press and hold BACKWARD (.) or FORWARD (>) for about two seconds during playback.

The DVD+VCR will now go into SEARCH mode.

2Press and hold BACKWARD (.) or FORWARD (>) repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward).

3To return to playback, press PLAY ( N ).

OPERATION

27

Image 27
Contents Page Safety Precautions Otes on CopyrightsRegulatory Information FCC Part Introduction Important Safety InstructionsTable of Contents Playable Discs Remote control battery installationRemote Control Operation Range Before UsePrecautions About SymbolsSetting the Output Source Front Panel Display Window DVDREC Remote Control ANT.IN Antenna Input Rear PanelVideo OUT DVD OUT Digital Audio OUT Coaxial DVD OUTConnecting Antenna/Cable TV to ConnectionsPreparation Optional, Preferred TV Connections Connections Basic TV ConnectionsA1A2 Accessory Audio/Video A/V Connections toDigital Multi-channel sound Rear of DVD+VCR OteVCR Operation Setup On-Screen Display OSD Setting the On-Screen DisplayMenu Selection Channel Selection VCR Operation Setup Setting the VCR Setup MenuVCR Operation Setup Setting the Clock Auto Clock SetManual Clock Set On-screen display operation DVD Operation SetupGeneral Explanation On-Screen DisplayDisplay DVD Operation Setup Initial SettingsInitial Settings General Operation LanguageOthers AudioLock Operation with tape Normal Playback Special Effect PlaybacksOperation To record one TV program while watching another Timer RecordingOperation with tape Normal Recording To pause the recordingSame day, priority is given to Earliest recording. For Checking Erasing the Timer ProgramOperation with tape Program PriorityInstant Timer Recording Checking the Recording TimeTo extend the Recording Time TV screen Multichannel TV Sound Indicator MTSMTS Multi-Channel TV Sound SAP Second Audio Program RecordingAdditional Information VCR Operation with tape Tape Counter Memory FeatureOperation with DVD Playing DVD General FeaturesOperation with DVD General Features Additional Information DVD Operation with DVDAbout MP3 About WMA Windows Media AudioTo stop playback at any other time Press Stop Repeat A-B CD Operation with Audio CD and MP3/WMA DiscsMoving to another Track CD MP3 Repeat Track/All/Off CD MP3 WMAInsert a disc and close the tray Operation with Photo Disc Viewing a Photo Disc JpegMoving to Another File To Rotate pictureErasing the Complete Program List Programmed Playback CD MP3Repeat Programmed Tracks Erasing a Track from Program ListSymptom Cause Correction TroubleshootingDVD+VCR is in Timer mode ReferenceMoisture Condensation Troubleshooting Video Head Cleaning Video head cleaningVideo head clogging Language Code Language Code ListCountry Code Country Code ListGeneral SpecificationsVCR Specifications DVD Specifications3834RV0009B