GoVideo DV2140 manual MTS Multi-Channel TV Sound, Multichannel TV Sound Indicator MTS, TV screen

Page 25
(STEREO) POSITION: The left channel sound (L) is heard from the left speaker and the right channel sound
(R) is heard from the right speaker.
(LEFT) POSITION: The left channel sound (L) is heard from both speakers.
(RIGHT) POSITION: The right channel sound (R) is heard from both speakers.
3 Press MENU.
Insert a cassette and press PLAY ( N ).
4 Adjust volume at your stereo system.
2
Set the AUDIO OUTPUT option to STEREO position.
1
Set the AUDIO MODE option to HI-FI on the SETUP menu .
Operation with tape (Continued)
VHS Hi-Fi Stereo System/ MTS Broadcast
This DVD+VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The informa- tion below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode.
Playback with Hi-Fi Stereo Audio Sound
A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for correct stereo playback. To experience the full and rich stereo sound available with Hi-Fi recorded tapes, we recommend the connection of this unit to a home stereo audio system.

MTS (Multi-Channel TV Sound)

This DVD+VCR will decode MTS stereo and bilingual (SAP) off-the-air broadcast sound signals. It also decodes stereo TV sound from local cable companies, as long as they operate on assigned cable frequencies and use the EIA-recommended MTS stereo/bilingual TV

sound system.

Multichannel TV Sound Indicator (MTS)

Shows On-screen as illustrated below when ENTER is pressed.

One or both of the indicators will light, depending on the MTS broadcast.

TV screen

 

 

STEREO

CH 4

 

 

 

 

Lights up when a stereo broadcast

STEREO/SAP

 

 

is being received.

 

 

 

 

 

SAP

 

 

 

 

 

 

Lights up when a SAP BILINGUAL

 

 

 

broadcast is being received.

If only STEREO appears on the TV screen.

The DVD+VCR can record in stereo onto the VHS Hi-Fi audio tracks when the BROADCAST TYPE option is in the STEREO position. The DVD+VCR will also record mono audio onto the mono audio track.

If only SAP appears on the TV screen.

Set the BROADCAST TYPE option to SAP.

If STEREO/SAP appears on the TV screen

Use the BROADCAST TYPE option to select the desired recording mode (STEREO or SAP).

SAP (Second Audio Program) Recording

Some stations transmit a Second Audio Program, which is used for a second language or additional information. When the station broadcasts a Second Audio Program, follow the procedure below to record the SAP.

1Insert a video cassette with the safety tab intact.

2(SETUP menu).

Do this only if the SAP appears on the TV screen or you know the program will use the SAP.Set the BROADCAST TYPE option to SAP

3Press MENU.

4 Set the desired recording speed (SP or SLP) by pressing SP/SLP.

5 Select the desired channel. The SAP should appear on the TV screen.

6You are now recording the program you see and hear on the TV.Press REC (z) once

7Press STOP (x) to stop recording.

25

OPERATION

Image 25
Contents Page Otes on Copyrights Safety PrecautionsRegulatory Information FCC Part Introduction Important Safety InstructionsTable of Contents Remote Control Operation Range Remote control battery installationBefore Use Playable DiscsAbout Symbols PrecautionsSetting the Output Source Front Panel DVD Display WindowREC Remote Control Video OUT DVD OUT Rear PanelDigital Audio OUT Coaxial DVD OUT ANT.IN Antenna InputConnections Connecting Antenna/Cable TV toPreparation Optional, Preferred TV Connections Connections Basic TV ConnectionsDigital Multi-channel sound Accessory Audio/Video A/V Connections toRear of DVD+VCR Ote A1A2Setting the On-Screen Display VCR Operation Setup On-Screen Display OSDMenu Selection Channel Selection VCR Operation Setup Setting the VCR Setup MenuAuto Clock Set VCR Operation Setup Setting the ClockManual Clock Set General Explanation DVD Operation SetupOn-Screen Display On-screen display operationInitial Settings General Operation DVD Operation Setup Initial SettingsLanguage DisplayOthers AudioLock Special Effect Playbacks Operation with tape Normal PlaybackOperation Operation with tape Normal Recording Timer RecordingTo pause the recording To record one TV program while watching anotherOperation with tape Checking Erasing the Timer ProgramProgram Priority Same day, priority is given to Earliest recording. ForChecking the Recording Time Instant Timer RecordingTo extend the Recording Time MTS Multi-Channel TV Sound Multichannel TV Sound Indicator MTSSAP Second Audio Program Recording TV screenAdditional Information VCR Operation with tape Tape Counter Memory FeatureOperation with DVD Playing DVD General FeaturesOperation with DVD General Features Additional Information DVD Operation with DVDAbout WMA Windows Media Audio About MP3To stop playback at any other time Press Stop Moving to another Track CD MP3 Operation with Audio CD and MP3/WMA DiscsRepeat Track/All/Off CD MP3 WMA Repeat A-B CDMoving to Another File Operation with Photo Disc Viewing a Photo Disc JpegTo Rotate picture Insert a disc and close the trayRepeat Programmed Tracks Programmed Playback CD MP3Erasing a Track from Program List Erasing the Complete Program ListSymptom Cause Correction TroubleshootingReference DVD+VCR is in Timer modeMoisture Condensation Video head cleaning Troubleshooting Video Head CleaningVideo head clogging Language Code Language Code ListCountry Code Country Code ListVCR Specifications SpecificationsDVD Specifications General3834RV0009B