Technics PV-D4754S Weak Signal Display Feature, Auto Shut-Off Feature, Action Select SET Display

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

ACTION

SELECT SET

DISPLAY

Weak Signal Display Feature

When “ON,” picture is displayed regardless of signal strength.

1Press ACTION to display MENU.

2			MENU	Press
	SET UP VCR			to select “SET UP
	SET UP CHANNEL
	SET UP CLOCK
	IDIOMA/LANGUE : ENGLISH			CHANNEL,” and
	VCR’S OUTPUT CH:3
	SELECT :		SET : SET	press SET.
	EXIT	: ACTION
3		SET UP CHANNEL		Press
	ANTENNA		: CABLE	to select “WEAK SIGNAL
	WEAK S I GNAL D I SPLAY:OFF
	AUTO SET
				DISPLAY,” and
	SELECT :		SET: SET	press SET
				to set “ON” or “OFF.”
	EXIT	: ACT I ON

•ON: Picture is displayed regardless of signal condition, and may not always be clearly visible.

OFF: Screen turns solid blue when signal is weak or non-existent.

•Selecting ON has no effect on connected equipment with blue back feature.

4Press ACTION

to return to normal screen.

Auto Shut-Off Feature

The power shuts off at a preset time.

1Press ACTION to display MENU.

2		MENU			Press
	SET UP VCR
	SET UP CHANNEL				to select “SET UP VCR,” and
	SET UP CLOCK				press SET.
	VCR’S OUTPUT CH:3
	IDIOMA/LANGUE : ENGLISH
	SELECT :		SET : SET
	EXIT	: ACTION
3		SET UP VCR			Press
	REPEAT PLAY			: OFF	to select “AUTO SHUT-OFF.”
	AUTO SHUT-OFF			: OFF
	REMOTE WARN I NG			: ON	Press SET repeatedly to
	FRONT DISPLAY			: ON
	AUTO VCR/TV			: ON	change shut-off time as
	TAPE SELECT			: T-120
	SELECT :		SET : SET		shown below.
	END	: ACT I ON
					2 Hours
					OFF	4 Hours

6 Hours

4Press ACTION

to return to normal screen.

Note

•The shut-off countdown will not function during Play or Record.

VCR Operation

33