Technics PV-D4754S manual Before Requesting Service, Power Solution, Recording & Playback Solution

Before Requesting Service

Check the following points if you are having trouble with your DECK.

Power	Solution
No power…	•	Completely insert Power Plug into an AC outlet.
	•	Press POWER button on.
	•	Make sure power source is active.
Power turns itself off...	•	Auto power-off (shutoff) occurs after about 5 min.
		in DVD mode with no operation, or if there is no
		broadcast signal in TV or Playback mode.
		Turn the power back on. (pp. 23, 33)
Recording & Playback	Solution
TV program cannot be recorded...	•	Check connections between DECK, external
		antenna, and TV.
	•	Check channel selections.
	•	Make sure your antenna system (CABLE or TV) is
		correctly set. (Channels [p. 18])
	•	Make sure cassette record tab is intact. (p. 6)
Timer recording cannot be	•	Confirm that clock is set to current time and date.
performed…	•	Make sure Cable/DSS box (if used) is left on and
		tuned to channel to be recorded.
	•	Set recording start/stop times correctly. (p. 24)
	•	Timer recording may not be performed or continued
		if a power interruption occurs before or during a
		Timer Recording, even after power is restored.
There is no playback picture, or the	•	Select channel 3 or 4 on TV to match VCR output
playback picture is noisy or contains		channel (3 or 4) (p. 16) or select LINE.
streaks...	•	Set VCR/TV selector to “VCR.”
	•	Adjust TRACKING control in either direction. (p. 4)
	•	Try Head Cleaning. (p. 4)
During special effects playback	•	Set TV’s Vertical Hold Control to MANUAL, then
picture may contain some vertical		adjust.
jitter when using a TV with an
Automatic Vertical Hold Control...
DECK cannot be controlled...	•	Make sure DECK power is on.
	•	Check Remote batteries.
	•	Make sure VCR LOCK is set to off. (p. 32)
	•	Make sure Remote is in proper mode. (p. 28)
	•	Make sure Timer Recording is not in progress.
Remote Control	Solution
DECK cannot be remote controlled...	•	Make sure DECK power is on.
	•	Make sure Remote is in VCR mode.
	• Aim Remote Control directly at remote sensor on DECK. (p.9)
	•	Avoid any object blocking signal path.
	•	Check Remote batteries. (p. 4)
	•	Exposing DECK remote sensor to direct fluorescent
		or outdoor light may cause signal interference.
PROG buttons do not respond...	•	PROG functions are not available in COMPONENT
		Video Output and S-VIDEO OUT. Set TV to either RF
		IN or VIDEO IN. (p. 10)
	•	Check Remote batteries. (p. 4)
	•	Press VCR or DVD button for DVD/VCR mode. (p. 28)

58 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo