E L D I S P L A Y
The following is an overview of the front panel display.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DECK 1 | VCR | TIMER | COPY | SAP | STEREO | DECK 2 | |||||||||
S L P | AM S L P |
F R O N T P A N
910
1D E C K 1 S TAT U S I N D I C AT O R
Lights to show you that Deck 1 is active. Also, graphically displays the status of the tape in Deck 1; e.g., Stop, Play, Rewind, etc.
2T V / V C R I N D I C AT O R
Lights when the
3T I M E R I N D I C AT O R
Lights to show you that a Timer Recording has been programmed and stored in memory. Blinks if there is a Timer Recording error.
4C O P Y I N D I C AT O R
Lights to show you that a tape is being copied.
5S A P I N D I C AT O R
11 12
8D E C K 2 S TAT U S I N D I C AT O R
Lights to show you that Deck 2 is active. Also, graphically displays the status of the tape in Deck 2; e.g., Stop, Play, Rewind, etc.
9D E C K 1 P L AY / R E C O R D S P E E D
Shows you the current playback (SP, LP, or SLP) or record speed (SP or SLP) for Deck 1.
1 0 C L O C K / TA P E C O U N T E R
Shows you the current time, the tape counter position, or the time remaining until the end of the tape in the active deck, as set by the CLK/CTR key. Also briefly displays the status of the active deck when you press a deck control key; e.g., STOP 
, PLAY 
, REWIND 
, etc.
1 1 A M / P M I N D I C AT O R
Lights when a Second Audio Program, usually a second lan- guage, is available for the current TV channel.
6H i - F i I N D I C AT O R
Lights when a tape is playing a
7S T E R E O I N D I C AT O R
Lights when the channel you are watching is broadcast in stereo.
Lights when the time is A.M., turns off when the time is P.M.
1 2 D E C K 2 P L AY / R E C O R D S P E E D
Shows you the current playback (SP, LP, or SLP) or record speed (SP or SLP) for Deck 2.
8