Sensory Science DDV2120 manual M E R R E C O R D I N G

6

T I M E R R E C O R D I N G

N O T E

T I M E R R E C O R D

This chapter provides step by step instructions

for programming Timer Recordings.

Follow these steps to program your VCR to record up to 16 events.

			press			MENU						1	I N S E R T T A P E
													Insert a blank tape with a record
													safety tab into Deck 1 or Deck 2.
													Record Safety Tab
					MAIN MENU
												2	O P E N M A I N M E N U
1		Copy Settings
													Press MENU.
2		Playback Settings
3		Record/Edit Settings
4		Channel Settings
												3	S E L E C T “ T I M E R R E C O R D I N G ”
5		VCR Settings
6		Timer Recording											Press 6 (see note below).
7		Language/Langue
/			= Move			= Sel				MENU = Quit		4	S E L E C T E V E N T N U M B E R
				press		6							Use the 0-9 keys to enter any available event
													number between “01” and “16.”
												5	S E T D AT E A N D T I M E
			SELECT EVENT [1-16] :01										Use the 0-9 keys or UP/DOWN arrow keys to
1			- - : - - - -			-	- -			- - - / - -
			- H - - M				Ch - -			Deck - - -			set the date and time of the event. To correct
2			- - : - - - -			-	- -			- - - / - -			an entry, press the LEFT arrow key to go back
			- H - - M				Ch - -			Deck - - -
													and then enter the new numbers. To skip an
3			- - : - - - -			-	- -			- - - / - -
			- H - - M				Ch - -			Deck - - -			entry without changing it press the RIGHT arrow
4			- - : - - - -			-	- -			- - - / - -			key.
			- H - - M				Ch - -			Deck - - -			S e t M o n t h
	/		To Move							= Select
													Enter the month as a 2-digit number; e.g., for
			use		0				9	to select			January, press “01.”
										event 01-16
													S e t D a y
													Enter the day as a 2-digit number; e.g., for the
			SET MONTH [1-12] :08										ninth, press “09.”
1		Aug			2001		10:30PM				1H00M
	Su		Mo		Tu	We			Th	Fr	Sa		S e t H o u r
						1			2	3	4		Enter the hour as a 2-digit number; e.g., for
	5		6		7	8			9	10	11		12:00, press “12.”
	12		13		14	15			16	17	18
													S e t M i n u t e
	19		20		21	22			23	24	25
26			27		28	29			30	31			Enter the minute as a 2-digit number; e.g., for
1-Time					Ch10			Deck 1			Auto		12:00, press “00.”
										to set month, day,			S e t A M / P M
			use		0				9				Press “1” for AM or “2” for PM.
										hour, minute, am/pm
					continued...

•If you select Timer Recording from the Main Menu without having set the clock, the Clock Settings menu will appear. You must set the Clock before you can program a Timer Recording (see page 46).

16

Dual-Deck VCR User’s Guide