LG Electronics RU-50PX11 External A/V Source Setup, How to connect, How to use, DVD Setup

Installation

External A/V Source Setup

How to connect

Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure.

When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

How to use

1.Select the input source by using the TV/VIDEO button on the remote control. (If connected to A/V INPUT 1, select Video 1 input source).

2.Operate the corresponding external equipment. Refer to external equipment operating guide.

COMPONENT	MONITOR
INPUT 2	OUTPUT

COMPONENT			A/V
INPUT 1			INPUT 1	S-VIDEO	Antenna	AC INPUT
R	L	R	L/MONO

VIDEO AUDIO AUDIO VIDEO

Camcorder

R AUDIO L VIDEO

Video Game Set

DVD Setup

How to connect

1.Connect the DVD video outputs (Y, PB, PR) to the COMPONENT (Y, PB, PR) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the fig- ure.

2.If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.

NOTE: If your DVD player does not have component video output, use S-Video.

How to use

1.Turn on the DVD player, insert a DVD.

2.Use the TV/VIDEO or MULTIMEDIA button on the remote control to select Component 1 or Component 2. (If connected to S- VIDEO, select the Video 1 or Video 2 external input source.)

3.Refer to the DVD player's manual for operating instructions.

•Component Input ports

To get better picture quality, connect a DVD player to the compo- nent input ports as shown below.

Component ports	Y	PB	PR
on the TV
Video output ports	Y	Pb	Pr
	Y	B-Y	R-Y
on DVD player	Y	Cb	Cr
	Y	PB	PR

COMPONENT	MONITOR
INPUT 2	OUTPUT

COMPONENT			A/V
INPUT 1			INPUT 1	S-VIDEO	Antenna	AC INPUT
R	L	R	L/MONO

VIDEO AUDIO AUDIO VIDEO

or

B R (R) AUDIO (L) S-VIDEO (R) AUDIO (L)

DVD

Owner’s Manual 13