External Control Device Setup
26. ISM Method (Command2:p)
G To avoid having a fixed image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data | 0: Normal | 2: Orbiter | |
| 1: White wash | 3: Inversion | |
Acknowledgement |
|
| |
|
|
|
|
[p][ | ][Set ID][ ][OK][Data][x] |
|
|
|
|
|
|
27. Low Power (Command2:q)
G To control the low power function on/off.
31. Auto Configure (Command2:u)
G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1: To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data 0: Low power off 1: Low power on
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
28. Orbiter Time Setting (Command2:r)
G To adjust orbiter operation time term. Transmission
[j][r][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: FE
32. Tune command (Command: m a)
G Tune channel to following physical number
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 0: Air: 02 ~ 45, Cable: 01, 0E ~ 7D
1:0
2:0
3:High → Main Channel: 0, Sub Channel: 1
Low → Air: 0, CATV: 1
Acknowledgement
[a][ ][Set ID][ ][OK][Data0][ ][Data1][ ][Data2][ ][Data3][x]
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
29. Orbiter Pixel Setting (Command2:s)
G To adjust pixel number in orbiter function. Transmission
[j][s][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: 9
33. Channel Add/Del (Command: m b)
G To add and delete the channels
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Memory
1: Channel Erase
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
30.Picture Size Setting for Double Window mode (Command2:t)
G To adjust main window size in Double Window mode.
Transmission
[j][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 14
•Refer to ‘Real data mapping1’. See page 35. Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
34. Key (Command: m c)
G To send IR remote key code Transmission
[m][c][ ][Set ID][ ][Data][ ][Cr]
Data Key code: Refer to page 40.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
38 Plasma TV