Operation
Screen Menu Options
Auto Adjustment
-RGB (PC) mode only; This function doesn’t work for
-Automatically adjusts picture position and minimizes image shaking.
-After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.
-The Auto config. and Manual config. are not active in DVI mode.
1. | Press the MENU button and then use D / E button to select the SCREEN menu. |
| Auto config. |
| To set |
2. | Press the G button and then use D / E button to select Auto config.. | CHANNEL | G | ||
PICTURE | ARC |
|
| ||
3. | Press the G button to run Auto configure. | Position |
|
| |
|
|
| |||
| Manual config |
|
| ||
| • When Auto config. has finished, OK will be shown on screen. | SOUND |
|
| |
| TIMER | Reset |
|
| |
| • If the position of the image is still not correct, try Auto adjustment again. |
|
|
| |
|
|
|
|
| |
4. | In RGB (PC) mode, if the image needs to be adjusted more after using Auto | SPECIAL |
|
|
|
|
|
|
| ||
| config., you can make further adjustments with the Manual config. option. | SCREEN |
|
|
|
|
| PIP/DW |
|
|
|
|
| LOCK | Menu Prev. |
|
|
|
|
|
|
|
Setting Picture Format
-Caution: If a 4:3 fixed image is on the screen for a long time, it may remain visible.
-Set every aspect ratio for TV, Video, Component 480i sources.
-Use 4:3, or 16:9 for other
-Horizon is not available for Component (480p,720p,1080i), DTV (480p,720p,1080i) sources.
1.Press the ARC button repeatedly to select the desired picture format. You can also adjust ARC in the SCREEN menu.
•4:3
Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides.
•16:9
Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
•Horizon
Choose Horizon when you want to adjust the picture in a
•Zoom
-Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped.
Screen Position
-This function works in the following modes:
1.Press the MENU button and then use D / E button to select the SCREEN menu.
2.Press the G button and then use D / E button to select Position.
3.Press the G button and then use D / E / F / G button to adjust the position.
4.Press the ENTER button to save.
CHANNEL
PICTURE
SOUND
TIMER
SPECIAL
SCREEN
PIP/DW
LOCK
Auto config.
ARC
PositionG
Manual config
Reset
Menu Prev.
D
F E G
28 Plasma TV