Channel Menu Options

Operation

Auto Program should be used to memorize all the active channels in your area before you are able to use the TV. There are two ways of storing channels in the TV's memory. You can use either.

One is called AUTO PROGRAM and the other is called MANUAL PROGRAM.

In AUTO PROGRAM mode, the TV will memorize the channels in ascending numerical order. If there are additional channels you want to add or delete, you can manually add or delete those channels with Manual Program.

Auto Program: Channel Search

-Redo Auto Program if the Plasma Display is ever moved to another location.

-Auto Program will search for channels only through the ANT IN jack.

-If channels numbers for broadcast over-the air TV and cable TV are duplicated where different channels have the same number, press the same number but- tons again to toggle between:

Broadcast TV Channels				Cable TV Channels
Broadcast TV Channels				Cable TV Channels

(For example, press 17 to go to the channel, press 17 again to go to the dupli- cated channel.)

1.Press the A.PROG button and then press the G button. AUTO PROGRAM starts the channel search.

If you want to stop auto programming, press the ENTER button. Only the chan- nels found up to at that time are memorized.

•You can also select the Auto program option and do a channel search in the CHANNEL menu.

CHANNEL

PICTURE

SOUND

TIMER

SPECIAL

SCREEN

PIP/DW

LOCK

Auto program

To start

Manual program

Favorite channel

Menu Prev.

Manual Program: Adding/Deleting Channels

- You can add or delete channels from the channel scan manually.

1.Use the D / E or NUMBER buttons to select the channel number you want to add or delete.

2.Press the MEMORY/ERASE button.

3.Use the MEMORY/ERASE button to select Memory or Erase.

4.Press the ENTER button.

•You can also do Manual program with the CHANNEL menu.

Fine Tuning Adjustment

-Use this function to correct the picture's instability and condition if it is poor.

1.Press the MENU button and then use D / E button to select the CHANNEL menu.

2.Press the G button and then use D / E button to select Manual program.

3.Press the G button and then use D / E button to select Fine.

4.Use the F / G button to adjust the picture to your preference.

5.Press the ENTER button to save.

Notes

•To remove fine tuning from a channel, reprogram the finely-tuned channel with Auto program or Manual Program.

•If a finely-tuned channel is memorized, the color of the channel number changes to yellow.

CHANNEL

PICTURE

SOUND

TIMER

SPECIAL

SCREEN

PIP/DW

LOCK

Auto program

Manual program G

Favorite channel

Menu Prev.

Memory

Fine

Booster

Off

Owner’s Manual 17