LG Electronics Installing Batteries, 42PC3D/3DV, 50PC3D 60PC1D 32/37/42LC2D, 32LC2DU

Introduction

Installing Batteries Remote control effective range

32/37/42LC2D,

32LC2DU

42PC3D/3DV, 50PC3D 60PC1D

■Open the battery compartment cover on the back side and install the batteries matching cor- rect polarity (+with +,-with -).

■Install two 1.5V AA batteries. Don’t mix old or used batteries with new ones.

■Close cover.

■Use a remote control up to 7 meters distance and 30 degree (left/right) within the receiving unit scope.

■Dispose of used batteries in a recycle bin to pre- serve environment.

ATTACHING THE TV TO A WALL

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.

Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, poten- tially causing injury or damaging the product.

Caution: Please make sure that children don’t climb on or hang from the TV.

42PC3D/3DV, 50PC3D 60PC1D 32/37/42LC2D, 32LC2DU

■Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.

*If your product has the bolts in the eye-bolts position, loosen the bolts.

Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

■Use a sturdy rope (not provided as parts of the product, must purchase sepa- rately) to tie the product. It is safer to tie the rope so it becomes horizontal

between the wall and the product.

14