Reference
01. Power (Command2:a)
GTo control Power On/Off of the TV.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off | 1 : Power On |
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
*In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function.
02. Input Select (Command2:b) (Main Picture Input)
GTo select input source for the TV.
Transmission
[k][b][ | ][Set ID][ | ][Data][Cr] |
|
|
|
|
|
Data | 0: DTV | 5: Component 2 | |
| 1: Analog | 7: | |
| 2: AV1 | 8: HDMI1/DVI | |
| 3: AV2 | 9: HDMI2 | |
4: Component 1
[b][ ][Set ID][ ][OK][Data][x]
Acknowledgement
03. Aspect Ratio (Command2:c) (Main picture format)
GTo adjust the screen format.
You can also adjust the screen format using the RATIO button on remote control or in the Option menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Date 1: 4:3 | 4: Zoom 1 | |
2: 16:9 | 5: Zoom 2 | |
3: Horizon | 6: Set by program | |
Acknowledgement |
|
|
|
|
|
[c][ ][Set ID][ ][OK][Data][x] |
|
|
|
|
|
04. Screen Mute (Command2:d)
GTo select screen mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
05. Volume Mute (Command2:e)
GTo control volume mute on/off.
You can also adjust mute using the MUTE button on remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off) 1 : Volume mute off (Volume on)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
06. Volume Control (Command2:f)
GTo adjust volume.
You can also adjust volume with the volume buttons on remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
•Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
07. Contrast (Command2:g)
GTo adjust screen contrast.
You can also adjust contrast in the Video menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
•Refer to ‘Real data mapping’ as shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
08. Brightness (Command2:h)
GTo adjust screen brightness.
You can also adjust brightness in the Video menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
•Refer to ‘Real data mapping’ as shown below. Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
*Real data mapping 0 : Step 0
A : Step 10 (SET ID 10)
F: Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63: Step 99 (SET ID 99)
64: Step 100
*Tint : R50 ~ G50
*Balance : L50 ~ R50
55