LG Electronics 60PC1D, 42PC3D External AV Source Setup, When connecting with an S-Video cable

Installation

When connecting with an S-Video cable

VCR

	ANT IN
S-VIDEO OUT	ANT OUT
(R) AUDIO (L)	VIDEO

	4	IN
	1		2
				C
	VIDEO		AUDIO	OMPONENT IN
				AV OUT
OPTICAL				AV IN
DIGITAL AUDIO			(MONO)
	S-VIDEO	VIDEO	AUDIO	1
OUT

1Connect the S-VIDEO output of the VCR to the S- VIDEO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input.

2Connect the audio outputs of the VCR to the AUDIO input jacks on the set.

3Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

4Select AV1 input source with using the INPUT button on the remote control.

- If connected to AV IN2, select AV2 input source.

Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work.

External AV Source Setup

1

Camcorder

Video Game Set L AUDIO R VIDEO

1Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

2Select AV2 input source with using the INPUT button on the remote control.

-If connected to AV IN1 input, select AV1 input source.

3Operate the corresponding external equipment. Refer to external equipment operating guide.

•This TV finds the connected input sources automatically for AV1, AV2, Component 1-2, RGB, HDMI1/DVI and HDMI2 sources are connected.

20