Automated Installation Routine Wizard (Cont.)
Pro:Centric Manual Configuration
If you already know the settings (i.e., Data Channel and Pro:Centric Application Mode) that need to be configured in order for the TV to connect to the Pro:Centric server, you may streamline the setup process by entering this data manually.
1.Use the Up/Down arrow keys on the Installer Remote to select/highlight Pro:Centric Manual from the Automated Installation Routine Wizard Welcome screen. Then, press OK.
In the first Manual Configuration Screen (see example below), you will be able to configure the appropriate Pro:Centric settings. Use the Up/Down arrow keys on the Installer Remote to navigate between fields.
Note: Select the “Back” button from the Manual Configuration screen or press the
key on the Installer Remote, if desired, to return to the Welcome screen.
2.In the Pro:Centric Mode field, use the Left/Right arrow keys to select the appropriate Pro:Centric Application
Note: For remote management only, select the Pro:Centric Mode “Configuration Only” option to search for TV
3.In the Channel Number field, either key in or use the Left/ Right arrow keys to select the RF channel number for the Data Channel of the Pro:Centric server. The Data Channel can be set from 1 to 135.
4.Once all fields are completed as required, you may have two options (see also note below):
•To save the data entered and exit the wizard, use the arrow keys to select Save and Exit, and then press OK. The Pro:Centric application and/or
•To initiate a
The Pro:Centric Manual Configuration will proceed with the remaining Pro:Centric application and/or
Note: The RF signal must be detected on the Data Channel of the Pro:Centric server in order for you to select “Next” (you will see a “Data Channel found” message below the signal strength indicator).
| Manual Configuration |
|
|
|
| Move OK | Prev. |
| |||
|
| Pro:Centric Mode | < | GEM | > |
|
|
| |||
|
| Channel Number |
|
| 1 |
|
|
|
|
| |
|
| Signal Strength |
|
|
|
|
|
|
|
| |
|
|
|
|
| 0% |
|
| ||||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||
|
| BACK |
| Save and Exit |
|
| NEXT |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| Manual Configuration |
|
| Prev. |
| |||
|
|
| Processing Pro:Centric Configuration. |
|
|
| ||
|
|
| Step 4 may take up to 5 min(s). |
|
|
|
| |
|
|
| Please wait... |
|
|
|
| |
|
|
|
|
|
| 50% |
|
|
| Step 1 | Detecting the type of Pro:Centric network | : | RF | ||||
| Step 2 | Locating the Pro:Centric Server | : | DIGITAL 75 | ||||
| Step 3 | Determining the Pro:Centric mode | : | GEM | ||||
| Step 4 | Downloading the application files | : | In Progress | ||||
| Step 5 | Downloading the maintenance files | : |
|
|
| ||
| Step 6 | Saving the Pro:Centric configuration | : |
|
|
| ||
Warning - Do not remove AC power or the signal cables during these steps
12 |