LG Electronics 42LT670H, 55LS675H, 37LT670H, 32LT670H, 26LT670H Teaching FTG Configuration to a TV

Page 41

FTG Mode via CPU (Cont.)

Teaching FTG Configuration to a TV

This section describes how to “Teach” an FTG Configuration file from a USB memory device to a TV. Ensure you have completed the procedure on the previous page to create the FTG Configuration file before proceeding with the steps below.

Notes: • If the TV EBL is already in FTG Mode, you cannot use this procedure to make changes to the FTG Channel Map and FTG Installer Menu settings. You must use a direct PC-to-TV connection as described on page 44 or an FMA head end device to reconfigure the EBL.

If the preceding condition applies, but you wish to switch the TV to FTG mode via CPU, refer to Reference section, “Restoring Factory Defaults on the TV(s),” for further information before proceeding.

If the Automated Installation Routine Wizard appears on the screen when you turn ON the TV, you can use the “USB Configuration” option to configure this TV, if desired (see “USB Configuration” on page 13).

1.Turn ON the TV, and then plug the USB memory device that contains the FTG Configuration file into the Target LT670H or LS675H TV USB IN port.

2.Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is already in FTG Mode).

3.Use the arrow navigation keys to select/highlight either the Option menu icon from the TV setup menus or the Lock menu icon from the Function Menu. Then, press the number “7” key a total of seven times to display the USB Download Menu.

4.Use the Up/Down arrow keys to select Teach To TV (TLX), and then press OK.

5.Use the Up/Down arrow keys to select the FTG Configuration file you want to install, and then press OK.

Teaching status will be shown on a progress bar in a new window.

Do NOT remove the USB device until Teaching is complete. When the Teaching process is complete, the TV will briefly display a “Teaching Completed” window and then exit the USB Download Menu.

6.Remove the USB memory device from the Target TV, and verify that the FTG Configuration is resident on the Target TV.

The Target TV CPU is now in FTG Mode (if it was previously in Pass- through Mode).

Note: After the Teaching process is complete, the TV tunes according to the Start Channel setting in the Installer Menu. If a Start Channel is specified, the TV will tune to that channel; otherwise, the TV will tune to the lowest logical channel in the FTG Channel Map.

USB Download Menu

Upgrade TV Software

Upgrade PTC Software

Teach To TV (TLL)

Teach To TV (TLX)

Previous

OK

Teach To TV (TLX)

xxLT670H-UA00005.TLX

Previous

OK

Teach To TV

UPDATING...

50%

Do not unplug!

206-4213

41

Image 41
Contents Copyright 2012 LG Electronics U.S.A., Inc 206-4213 Rev DFor Customer Support/Service, please call­ Overloading Power CordGrounding Disconnect DeviceOutdoor Antenna Grounding CleaningAntenna Grounding According to NEC, ANSI/NFPA Transporting ProductTable of Contents Pass-through Mode Commercial Mode OverviewSetup Checklist External MPI Control Installer MenuRemote Management in FTG Mode FTG ModeProCentric Interactive Menu Navigation ProCentric TV Interactive Menu FeaturesProCentric Operation ProCentric Setup ProCentric Auto Configuration Automated Installation Routine Wizard50% ProCentric Manual ConfigurationUSB Configuration Clonable TV Setup Menu Features Custom Master TV SetupBefore You Begin Cloning MethodsSet Installer Menu items Custom Master TV Setup ProcedureSet up TV features Turn on the TVChannel Optional Run Auto TuningRecommended Lock the channel lineup Verify the TV setupAcronym Description Installer MenuAccessing the Installer Menu Exiting the Installer Menu and Activating Updates Using the Installer MenuNavigation within the Installer Menu Changing Installer Menu SettingsBrief Description of Function and Comments Installer Menu Items 000 throughRear RGB EN Installer Menu Items 078 throughMute Disable Detailed Descriptions of Installer Menu ItemsInstaller Sequence Feature Level Sleep TimerHDMI1 Enable Caption LockHDMI3 Enable HDMI2 EnableProcentric Atsc Tune ModeBack Lighting Atsc BandData Channel Power SavingsPC RF Wake HR PC RF Wake MNTo perform channel editing/labeling Channel Icons / Custom Text Labels 2-5-4 + Menu ModeBefore you begin cloning Cloning OverviewUSB Cloning Notes USB Cloning ProceduresLearn Setup from Master TV Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL TLL-1100A Cloning Notes Clone Programmer Cloning ProceduresTLL-1100A Clone Programmer MPIOptional Set the Clock LT2002 Clone Programmer LT2002 Cloning NotesClone Programmer Cloning Procedures FTG Mode via CPU or EBL FTG Mode of Operation OverviewFTG Mode via CPU FTG Mode via EBLFunction Menu Determining the TV Operating ModeTV Setup Menus FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning FTG Configuration from a TV Run Auto Tuning Channel Search Optional Manual Configuration / TV SetupLS675H Jack Panel FTG Mode via EBLLT670H Jack Panel FTG File Manager Utilities Overview FTG Configuration ListFTG File Manager Main Screen CLEAR/SAVEPrint MAP FTG Channel Map Configuration UtilityFTG Channel Map Editor UpdateADD ExitConfiguration Settings FTG Installer Menu Configuration UtilityRemote Jack Pack Setup Remote Jack Pack / TV Connections & SetupTV Connections RGB in PCUpgrading TV/PTC Software Checking the Software VersionsDownloading a Splash Screen Image Splash Screen Image File Guidelines31.3 Reference Power Consumption SettingsEnable Reference TV Aux Input ConfigurationTV Standby State TV Power On State Reference b-LAN Setup & Overview001 Default Off PowerPriority Video Audio Reference RJP Model List & Input Auto-sensing HierarchyInstaller Menu Item 117 Fact Default Reference Restoring Factory Defaults on the TVsAdditional FTG Mode via CPU Options Additional FTG Mode via EBL OptionsReference TV Zone Restrictions Side Jack Panel Reference LT670H Rear and Side Jack PanelsAudio in RGB/DVI Audio connection for RGB or DVI device Reference LS675H Rear and Side Jack PanelsReference External Speaker Setup Power Reference Installer Remote Control Typical Key FunctionsGeneral Troubleshooting TroubleshootingController Quick Check Troubleshooting Flow ChartSymptom Possible Causes Solutions Commercial Mode Check / FTG Operation TroubleshootingFTG Operation Troubleshooting Reset Clone Programmer After Static Shock Clone Programmer TroubleshootingSymptom Possible Causes Possible Solutions Clone ProgrammerPTC Glossary of TermsCPU EBLDocument Revision History Document Revision History / Open Source Software NoticeOpen Source Software Notice Date DescriptionFor Customer Support/Service, please call­
Related manuals
Manual 68 pages 22.8 Kb Manual 20 pages 9.41 Kb Manual 66 pages 62.39 Kb Manual 40 pages 22.94 Kb

37LT670H, 26LT670H, 42LT670H, 55LS675H, 32LT670H specifications

LG Electronics has long been a leader in the television market, and its LT670H series exemplifies the company's commitment to innovation and quality. This series includes models in various sizes: 42LT670H, 26LT670H, 32LT670H, and 37LT670H, catering to different consumer preferences and space requirements.

One of the hallmark features of the LT670H series is its high-definition display. All models in this lineup support resolutions that deliver sharp and vibrant images, ensuring a superior viewing experience. With their sleek and modern design, these televisions not only perform well but also enhance the aesthetics of any room.

LG's commitment to technology is evident in the incorporation of their renowned Triple XD Engine. This advanced picture processing technology enhances color accuracy, sharpness, and contrast, resulting in lifelike images. Whether users are watching movies, playing video games, or viewing sports, the LT670H series promises an immersive experience with stunning visuals.

The series is equipped with built-in speakers that provide clear and powerful audio. Additionally, the televisions are designed to work seamlessly with LG’s Clear Voice technology, which enhances dialogue clarity amid background sounds. This feature ensures that viewers never miss a word, making the LT670H series ideal for watching dramas, sports, or even news broadcasts.

Connectivity is also a strong point for the LT670H series. These models come with multiple HDMI and USB ports, which allow users to easily connect various devices such as gaming consoles, streaming devices, or external hard drives. The inclusion of support for various audio and video formats further adds to the versatility of these televisions.

For gamers, the LT670H series offers low input lag, making it a suitable choice for fast-paced gaming. Features like Game Mode optimize settings for gaming, ensuring a fast and responsive experience.

Moreover, LG has implemented energy-saving technologies across the LT670H range, demonstrating their commitment to sustainability. The energy-efficient designs help in reducing electricity consumption without compromising performance.

In summary, the LG Electronics LT670H series, including the 42LT670H, 26LT670H, 32LT670H, and 37LT670H models, combines cutting-edge technology, superior sound quality, and comprehensive connectivity options. These features make the LT670H series an excellent choice for consumers looking for high-quality televisions that fit various room sizes and viewing preferences. With their blend of performance and aesthetic appeal, the LT670H models stand out in today’s competitive television market.