LG Electronics 42LT670H, 55LS675H Power Savings, Data Channel, PC RF Wake HR, PC RF Wake MN

Page 26

Installer Menu (Cont.)

118 - POWER SAVINGS

Default set to 3—the power circuitry for both the embedded b- LAN module and the GAME CONTROL/MPI port is only powered when the TV is turned ON. When the TV is in Standby Mode, the embedded b-LAN and the GAME CONTROL/MPI port are not powered.

Note that the TV must be turned ON in order to communicate with the embedded b-LAN module for configuration and control when POWER SAVINGS is set to 3. If POWER SAVINGS is set to 1, the b-LAN module is always powered.

Similarly, if MPI communication is required for external MPI control, POWER SAVINGS should be set to 1 so that the GAME CONTROL/MPI port circuitry is always powered.

LT670H TVs only: For specific applications, the RS-232 (DB9) port may be used to provide +12v/1A external power (for example, to an external MPI control device). In this case, Installer Menu item 118 POWER SAVINGS must be set to 9—both the b-LAN module and the GAME CONTROL/MPI port circuitry are always powered, and the external power is provided on pin 9 of the RS-232 port.

Note: See Reference section, b-LAN Setup & Overview,” for further information.

Caution: POWER SAVINGS should NEVER be set to 7. This setting is intended for factory use only.

119 - DATA CHANNEL

Set to 0 (default) to disable. Set to the RF channel number of the data channel for Pro:Centric application (item 098 PRO:CENTRIC must be set appropriately) and/or TV E-Z Installation (splash screen, configuration, or firmware) data.

Note: Pro:Centric updates are downloaded from the Pro:Centric server to the TV when the TV is turned OFF. While Pro:Centric updates are in progress, it is not possible to turn ON the TV.

121 - P:C RF WAKE HR

Set the hour from 0 to 23 for Wake On RF. This item uses the 24- hour clock format. The value “128” is displayed as “OFF.” Directly entering 128 turns the Wake On RF feature OFF.

Note: This item is not available in the Installer Menu when item 119 DATA CHANNEL is set to 0.

122 - P:C RF WAKE MN

Set the minute from 0 to 59 for Wake On RF.

Note: This item is not available in the Installer Menu when item 119 DATA CHANNEL is set to 0 or when item 121 P:C RF WAKE HR is set to 128/OFF.

26

206-4213

Image 26
Contents 206-4213 Rev D Copyright 2012 LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Grounding Power CordOverloading Disconnect DeviceAntenna Grounding According to NEC, ANSI/NFPA CleaningOutdoor Antenna Grounding Transporting ProductTable of Contents Pass-through Mode Commercial Mode OverviewSetup Checklist Installer Menu External MPI ControlFTG Mode Remote Management in FTG ModeProCentric Interactive Menu Navigation ProCentric TV Interactive Menu FeaturesProCentric Operation ProCentric Setup Automated Installation Routine Wizard ProCentric Auto ConfigurationProCentric Manual Configuration 50%USB Configuration Before You Begin Custom Master TV SetupClonable TV Setup Menu Features Cloning MethodsSet up TV features Custom Master TV Setup ProcedureSet Installer Menu items Turn on the TVOptional Run Auto Tuning ChannelVerify the TV setup Recommended Lock the channel lineupAcronym Description Installer MenuAccessing the Installer Menu Navigation within the Installer Menu Using the Installer MenuExiting the Installer Menu and Activating Updates Changing Installer Menu SettingsInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 078 through Rear RGB ENMute Disable Detailed Descriptions of Installer Menu ItemsInstaller Sequence HDMI1 Enable Sleep TimerFeature Level Caption LockHDMI2 Enable HDMI3 EnableBack Lighting Atsc Tune ModeProcentric Atsc BandPC RF Wake HR Power SavingsData Channel PC RF Wake MNChannel Icons / Custom Text Labels 2-5-4 + Menu Mode To perform channel editing/labelingCloning Overview Before you begin cloningUSB Cloning Notes USB Cloning ProceduresLearn Setup from Master TV Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL TLL-1100A Clone Programmer Clone Programmer Cloning ProceduresTLL-1100A Cloning Notes MPIOptional Set the Clock LT2002 Cloning Notes LT2002 Clone ProgrammerClone Programmer Cloning Procedures FTG Mode via CPU FTG Mode of Operation OverviewFTG Mode via CPU or EBL FTG Mode via EBLFunction Menu Determining the TV Operating ModeTV Setup Menus FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning FTG Configuration from a TV Optional Manual Configuration / TV Setup Run Auto Tuning Channel SearchLS675H Jack Panel FTG Mode via EBLLT670H Jack Panel FTG File Manager Main Screen FTG Configuration ListFTG File Manager Utilities Overview CLEAR/SAVEFTG Channel Map Configuration Utility Print MAPADD UpdateFTG Channel Map Editor ExitFTG Installer Menu Configuration Utility Configuration SettingsTV Connections Remote Jack Pack / TV Connections & SetupRemote Jack Pack Setup RGB in PCChecking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings 31.3Reference TV Aux Input Configuration Enable001 Default Off Reference b-LAN Setup & OverviewTV Standby State TV Power On State PowerReference RJP Model List & Input Auto-sensing Hierarchy Priority Video AudioAdditional FTG Mode via CPU Options Reference Restoring Factory Defaults on the TVsInstaller Menu Item 117 Fact Default Additional FTG Mode via EBL OptionsReference TV Zone Restrictions Reference LT670H Rear and Side Jack Panels Side Jack PanelReference LS675H Rear and Side Jack Panels Audio in RGB/DVI Audio connection for RGB or DVI deviceReference External Speaker Setup Reference Installer Remote Control Typical Key Functions PowerTroubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckSymptom Possible Causes Solutions Commercial Mode Check / FTG Operation TroubleshootingFTG Operation Troubleshooting Symptom Possible Causes Possible Solutions Clone Programmer TroubleshootingReset Clone Programmer After Static Shock Clone ProgrammerCPU Glossary of TermsPTC EBLOpen Source Software Notice Document Revision History / Open Source Software NoticeDocument Revision History Date DescriptionFor Customer Support/Service, please call­
Related manuals
Manual 68 pages 22.8 Kb Manual 20 pages 9.41 Kb Manual 66 pages 62.39 Kb Manual 40 pages 22.94 Kb

37LT670H, 26LT670H, 42LT670H, 55LS675H, 32LT670H specifications

LG Electronics has long been a leader in the television market, and its LT670H series exemplifies the company's commitment to innovation and quality. This series includes models in various sizes: 42LT670H, 26LT670H, 32LT670H, and 37LT670H, catering to different consumer preferences and space requirements.

One of the hallmark features of the LT670H series is its high-definition display. All models in this lineup support resolutions that deliver sharp and vibrant images, ensuring a superior viewing experience. With their sleek and modern design, these televisions not only perform well but also enhance the aesthetics of any room.

LG's commitment to technology is evident in the incorporation of their renowned Triple XD Engine. This advanced picture processing technology enhances color accuracy, sharpness, and contrast, resulting in lifelike images. Whether users are watching movies, playing video games, or viewing sports, the LT670H series promises an immersive experience with stunning visuals.

The series is equipped with built-in speakers that provide clear and powerful audio. Additionally, the televisions are designed to work seamlessly with LG’s Clear Voice technology, which enhances dialogue clarity amid background sounds. This feature ensures that viewers never miss a word, making the LT670H series ideal for watching dramas, sports, or even news broadcasts.

Connectivity is also a strong point for the LT670H series. These models come with multiple HDMI and USB ports, which allow users to easily connect various devices such as gaming consoles, streaming devices, or external hard drives. The inclusion of support for various audio and video formats further adds to the versatility of these televisions.

For gamers, the LT670H series offers low input lag, making it a suitable choice for fast-paced gaming. Features like Game Mode optimize settings for gaming, ensuring a fast and responsive experience.

Moreover, LG has implemented energy-saving technologies across the LT670H range, demonstrating their commitment to sustainability. The energy-efficient designs help in reducing electricity consumption without compromising performance.

In summary, the LG Electronics LT670H series, including the 42LT670H, 26LT670H, 32LT670H, and 37LT670H models, combines cutting-edge technology, superior sound quality, and comprehensive connectivity options. These features make the LT670H series an excellent choice for consumers looking for high-quality televisions that fit various room sizes and viewing preferences. With their blend of performance and aesthetic appeal, the LT670H models stand out in today’s competitive television market.