LG Electronics 26LT670H, 55LS675H, 42LT670H FTG Mode via EBL, LT670H Jack Panel, LS675H Jack Panel

Page 44

FTG Mode via EBL

The following steps outline local FTG configuration of individual TV EBLs using a direct PC-to-TV connection. Refer to the Free-To-Guest (FTG) Device Configuration Application User Guide for further information.

Notes: • FTG Device Configuration Application software is available online at: www.LGsolutions.com/ ftgsoftware.

If the TV CPU is already in FTG Mode, you cannot use this procedure to make changes to the FTG Channel Map and FTG Installer Menu settings. Instead, refer to and use the processes described on pages 39 to 43 to reconfigure the TV CPU.

If the preceding condition applies, but you wish to switch the TV to FTG Mode via EBL, refer to Reference section, “Restoring Factory Defaults on the TV(s),” for further information before proceeding.

1. Install (if necessary) and launch the FTG Device

Configuration Application (v5.0.0 or higher) on the

LT670H Jack Panel

PC that will be used to configure the EBL.

2. Build an FTG Channel Map using the FTG Channel

Map Editor in the FTG Channel Map Configuration

Utility (or, if applicable, open an existing FTG

Configuration [.rml] file).

Note: Up to 141 logical channels can be defined in

the FTG Channel Map.

3. Connect the PC to the TV-LINK CFG jack on the

TV’s rear jack panel using a USB-to-TTL serial

cable (TTL-232R-5V-AJ). If necessary, install the

device driver on the PC.

AV IN

VIDEO

 

L/MONO-AUDIO-R

L R

 

USB-to-TTL Serial Cable

 

Required for direct PC-to-

 

TV FTG configuration.

AUDIO IN

 

(RGB/DVI)

 

 

ANTENNA/

 

CABLE IN

PTC SERVICE

Laptop

(SERVICE ONLY)

PC

 

TV-LINK

 

CFG

 

4.

Turn ON the TV.

 

Note: If Installer Menu item 118 POWER SAVINGS

 

is set to 3 (default), the TV must be ON in order for

 

steps 5 and 6 below to be successful.

5.

“Write” the FTG Channel Map to the EBL (switches

 

the EBL from Pass-through Mode to FTG Mode).

 

Note: After a “Write” of new data, the TV will briefly

 

display a green text banner that shows the EBL

 

firmware version and release date.

6.

“Read” the current FTG Installer Menu settings from

 

the EBL using the FTG Installer Menu Configuration

 

Utility. If necessary to make changes to Installer

 

Menu items, “Write” them back to the EBL in FTG

 

Mode.

7.

Save the FTG Channel Map and FTG Installer

 

Menu settings to an FTG Configuration (.rml) file for

 

future use.

8.

Tune the TV to a logical channel in the FTG

 

Channel Map.

TV-LINK CFG

Use for direct PC-to-

TV FTG configuration.

LS675H Jack Panel

 

 

 

USB-to-TTL Serial Cable

 

 

 

Required for direct PC-to-

 

 

 

TV FTG configuration.

 

 

AUDIO IN

 

 

 

(RGB/DVI)

ANTENNA/

 

AV IN

 

 

 

CABLE IN

 

VIDEO

PTC SERVICE

Laptop

L R

L/MONO-AUDIO-R

(SERVICE ONLY)

PC

TV-LINK CFG

 

 

 

 

TV-LINK CFG

Use for direct PC-to-

TV FTG configuration.

44

206-4213

Image 44
Contents 206-4213 Rev D Copyright 2012 LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Power Cord OverloadingGrounding Disconnect DeviceCleaning Outdoor Antenna GroundingAntenna Grounding According to NEC, ANSI/NFPA Transporting ProductTable of Contents Pass-through Mode Commercial Mode OverviewSetup Checklist Installer Menu External MPI ControlFTG Mode Remote Management in FTG ModeProCentric Interactive Menu Navigation ProCentric TV Interactive Menu FeaturesProCentric Operation ProCentric Setup Automated Installation Routine Wizard ProCentric Auto ConfigurationProCentric Manual Configuration 50%USB Configuration Custom Master TV Setup Clonable TV Setup Menu FeaturesBefore You Begin Cloning MethodsCustom Master TV Setup Procedure Set Installer Menu itemsSet up TV features Turn on the TVOptional Run Auto Tuning ChannelVerify the TV setup Recommended Lock the channel lineupAcronym Description Installer MenuAccessing the Installer Menu Using the Installer Menu Exiting the Installer Menu and Activating UpdatesNavigation within the Installer Menu Changing Installer Menu SettingsInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 078 through Rear RGB ENMute Disable Detailed Descriptions of Installer Menu ItemsInstaller Sequence Sleep Timer Feature LevelHDMI1 Enable Caption LockHDMI2 Enable HDMI3 EnableAtsc Tune Mode ProcentricBack Lighting Atsc BandPower Savings Data ChannelPC RF Wake HR PC RF Wake MNChannel Icons / Custom Text Labels 2-5-4 + Menu Mode To perform channel editing/labelingCloning Overview Before you begin cloningUSB Cloning Notes USB Cloning ProceduresLearn Setup from Master TV Teach Master TV Setup to Target TV Learn From TV TLL Teach To TV TLL Clone Programmer Cloning Procedures TLL-1100A Cloning NotesTLL-1100A Clone Programmer MPIOptional Set the Clock LT2002 Cloning Notes LT2002 Clone ProgrammerClone Programmer Cloning Procedures FTG Mode of Operation Overview FTG Mode via CPU or EBLFTG Mode via CPU FTG Mode via EBLFunction Menu Determining the TV Operating ModeTV Setup Menus FTG Mode via CPU From previous Teaching FTG Configuration to a TV Learning FTG Configuration from a TV Optional Manual Configuration / TV Setup Run Auto Tuning Channel SearchLS675H Jack Panel FTG Mode via EBLLT670H Jack Panel FTG Configuration List FTG File Manager Utilities OverviewFTG File Manager Main Screen CLEAR/SAVEFTG Channel Map Configuration Utility Print MAPUpdate FTG Channel Map EditorADD ExitFTG Installer Menu Configuration Utility Configuration SettingsRemote Jack Pack / TV Connections & Setup Remote Jack Pack SetupTV Connections RGB in PCChecking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings 31.3Reference TV Aux Input Configuration EnableReference b-LAN Setup & Overview TV Standby State TV Power On State001 Default Off PowerReference RJP Model List & Input Auto-sensing Hierarchy Priority Video AudioReference Restoring Factory Defaults on the TVs Installer Menu Item 117 Fact DefaultAdditional FTG Mode via CPU Options Additional FTG Mode via EBL OptionsReference TV Zone Restrictions Reference LT670H Rear and Side Jack Panels Side Jack PanelReference LS675H Rear and Side Jack Panels Audio in RGB/DVI Audio connection for RGB or DVI deviceReference External Speaker Setup Reference Installer Remote Control Typical Key Functions PowerTroubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckSymptom Possible Causes Solutions Commercial Mode Check / FTG Operation TroubleshootingFTG Operation Troubleshooting Clone Programmer Troubleshooting Reset Clone Programmer After Static ShockSymptom Possible Causes Possible Solutions Clone ProgrammerGlossary of Terms PTCCPU EBLDocument Revision History / Open Source Software Notice Document Revision HistoryOpen Source Software Notice Date DescriptionFor Customer Support/Service, please call­
Related manuals
Manual 68 pages 22.8 Kb Manual 20 pages 9.41 Kb Manual 66 pages 62.39 Kb Manual 40 pages 22.94 Kb

37LT670H, 26LT670H, 42LT670H, 55LS675H, 32LT670H specifications

LG Electronics has long been a leader in the television market, and its LT670H series exemplifies the company's commitment to innovation and quality. This series includes models in various sizes: 42LT670H, 26LT670H, 32LT670H, and 37LT670H, catering to different consumer preferences and space requirements.

One of the hallmark features of the LT670H series is its high-definition display. All models in this lineup support resolutions that deliver sharp and vibrant images, ensuring a superior viewing experience. With their sleek and modern design, these televisions not only perform well but also enhance the aesthetics of any room.

LG's commitment to technology is evident in the incorporation of their renowned Triple XD Engine. This advanced picture processing technology enhances color accuracy, sharpness, and contrast, resulting in lifelike images. Whether users are watching movies, playing video games, or viewing sports, the LT670H series promises an immersive experience with stunning visuals.

The series is equipped with built-in speakers that provide clear and powerful audio. Additionally, the televisions are designed to work seamlessly with LG’s Clear Voice technology, which enhances dialogue clarity amid background sounds. This feature ensures that viewers never miss a word, making the LT670H series ideal for watching dramas, sports, or even news broadcasts.

Connectivity is also a strong point for the LT670H series. These models come with multiple HDMI and USB ports, which allow users to easily connect various devices such as gaming consoles, streaming devices, or external hard drives. The inclusion of support for various audio and video formats further adds to the versatility of these televisions.

For gamers, the LT670H series offers low input lag, making it a suitable choice for fast-paced gaming. Features like Game Mode optimize settings for gaming, ensuring a fast and responsive experience.

Moreover, LG has implemented energy-saving technologies across the LT670H range, demonstrating their commitment to sustainability. The energy-efficient designs help in reducing electricity consumption without compromising performance.

In summary, the LG Electronics LT670H series, including the 42LT670H, 26LT670H, 32LT670H, and 37LT670H models, combines cutting-edge technology, superior sound quality, and comprehensive connectivity options. These features make the LT670H series an excellent choice for consumers looking for high-quality televisions that fit various room sizes and viewing preferences. With their blend of performance and aesthetic appeal, the LT670H models stand out in today’s competitive television market.