LG Electronics 37LC2RR* Button on the remote control, If connected to AV2 Euro scart socket

CONNECTIONS & SETUP

VCR SETUP

When connecting with a Euro Scart

TV Back

AV 1

ANTENNA

1	Connect the Euro scart socket of the VCR to
	the AV1 Euro scart socket on the set.
2	Insert a video tape into the VCR and press
	PLAY on the VCR. (Refer to the VCR owner’s
	manual.)

CONNECTIONS

AV 2

1

IN

VCR

3 Select AV1 input source with using the INPUT

button on the remote control.

- If connected to AV2 Euro scart socket,

select AV2 input source.

!NOTE

& SETUP

AUDIO/	(R) AUDIO (L)
VIDEO

GIf the S-VIDEO(Y/C) signal is received through the Euro scart socket 2 (AV2), you must change to the S-Video2 mode.

GIf you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.

When connecting with an S-Video cable

VCR ANT IN	IN
	S-VIDEO
ANT OUT	OUT

(R) AUDIO (L) VIDEO

		4
		1		2
		COMPONENT IN
	RGB IN	VIDEO		AUDIO
AUDIO	RGB
(RGB/DVI)	(PC/DTV)
	REMOTE	S-VIDEO		(MONO)
			VIDEO	AUDIO
	CONTROLIN	AV IN 3

1Connect the S-VIDEO output of the VCR to the S-VIDEO input on the set. The picture quality is improved; compared to normal com- posite (RCA cable) input.

2Connect the audio outputs of the VCR to the AUDIO input jacks on the set.

3Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

4Select A V 3 input source with using the INPUT button on the remote control.

!NOTE

GIf both S-Video and VIDEO sockets have been connected to the S-VHS VCR simultaneousiy. only the S-Video can be received.

18

Downloaded From TV-Manual.com Manuals