APPENDIX
APPENDIX
24.Abnormal State (Command2:z) To recognize an abnormal state.
This feature is not available for all models.
Transmission [k][z][ ][Set ID][ ][Data][ ][Cr]
Data FF: Read
Acknowledgement [z][ ][Set ID][ ][OK][Data][x]
Data 0: Normal (Power on and signal exist)
Data 1: No signal (Power on)
Data 2: Turn the set off by remote control
Data 3: Turn the set off by sleep time function
Data 4: Turn the set off by
Data 5: 5V down
Data 6: AC down
Data 7: Turn the set off by Fan Alarm function (option)
Data 8: Turn the set off by Off time function
Data 9: Turn the set off by Auto sleep function
* This function is “read only”.
25.ISM Method (Command1:j, Command2:p) (option)
To control the ISM method. You can also adjust ISM Method in SPECIAL menu.
This feature is not available for all models.
Transmission [j][p][ ][Set ID][ ][Data][Cr]
Data 0: Normal | Data 1: White Wash |
Data2: Orbiter | Data3: Inversion |
Acknowledgement [p][ ][Set ID][ ][OK][Data][x]
26.Low power (Command1:j, Command2:q) (option)
To reduce the power consumption of the monitor. You can also adjust Low power in SPECIAL menu. This feature is not available for all models.
Transmission [j][q][ ][Set ID][ ][Data][ ][Cr]
Data 0: OffData 1: On
Acknowledgement [q][ ][Set ID][ ][OK][Data][x]
27.Orbiter Time Setting (Command1:j, Command2:r) (option) To adjust orbiter operation time term.
This feature is not available for all models.
Transmission [j][r][ ][Set ID][ ][Data][ ][Cr]
Data Min: 1 ~ Max: FE
Refer to ‘Real data mapping 1’.
Acknowledgement [r][ ][Set ID][ ][OK][Data][x]
28.Orbiter Pixel Setting (Command1:j, Command2:s) (option) To adjust pixel number in orbiter function.
This feature is not available for all models. Transmission [j][s][ ][Set ID][ ][Data][Cr] Data Min: 1 ~ Max: 3
Refer to ‘Real data mapping 1’.
Acknowledgement [s][ ][Set ID][ ][OK][Data][x]
29.Picture Size Setting for Twin Picture Mode (Command 1 : j, Command 2 : t) (option)
To adjust pixel number in orbiter function.
This feature is not available for all models.
Transmission [j][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 20
Refer to ‘Real data mapping 1’.
Acknowledgement [t][ ][Set ID][ ][OK][Data][x]
30 . Auto Configure (Command1:j, Command2:u) (option)
To adjust picture position and minimize image
shaking automatically. It works only in RGB (PC) mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 1: To set
Acknowledgement [u][ ][Set ID][ ][OK][Data][x]
31.Programme selection (Command1:m, Command2:a) To select a programme for the main picture. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][Cr]
Data 0: Min: 0 ~ Max: 63 (0 ~ C7, 200Pr is on)
Refer to ‘Real data mapping 1’. Data 1: Don’t care
Data 2: 0 : Main 1 : Sub
Acknowledgement [a][ ][Set ID][ ][OK][Data0][x]
* Real data mapping 1 |
| * Real data mapping 2 | ||
0 | : Step 0 |
| 0 | : |
|
|
| 1 | : |
A | : Step 10 (Set ID 10) |
| 2 | : |
F | : Step 15 (Set ID 15) |
| 28 : 0 | |
10 | : Step 16 (Set ID 16) |
|
|
|
|
|
| 4E : +38 | |
64 | : Step 100 |
| 4F : +39 | |
|
|
| 50 : +40 | |
6E | : Step 110 |
|
|
|
|
|
| ||
73 | : Step 115 |
|
|
|
74 | : Step 116 |
|
|
|
C7 | : Step 199 |
|
|
|
FE | : Step 254 |
|
|
|
FF | : Step 255 |
|
|
|
|
|
|
|
|
86
Downloaded From