LG Electronics 26LH1DC4 manual Mute Disable, Sleep Timer, Caption Lock, Poll Rate, Timing Pulse

Page 60

COMMERCIAL MODE

COMMERCIAL MODE

(Continued from previous page)

The value range is 0 to 63, with 63 as the default, which gives the user the full range of volume control, if item 008 MIN VOLUME is also set at 0. Change values with ADJ Left/Right arrow keys. It may be best to set the same value on every 26LH1DC3/4/5.

*Note: The maximum volume level cannot have a value setting lower than the MIN VOLUME level (described previously).

010 - MUTE DISABLE

Enables or disables sound mute function. If set to 1, sound cannot be muted, mute is disabled. If set to 0, sound can be muted.

011 - KEY DEFEAT (Keyboard Defeat)

If set to 1, key defeat prevents the end user from accessing the onscreen menus with the display front panel—MENU, SELECT, and Left / Right arrow keys and TV/AV do not function. If set to 0, those keys do func- tion.

*Note: The menus can always be accessed by pressing MENU on the Installer remote.

015 - SLEEP TIMER

If set to 1, the SLEEP TIMER feature may be used. If set to 0, the Sleep Timer is not available.

016 - EN TIMER (Enable On/Off Timers)

If set to 1, Timer function is available to user. Set to 0 to disable On/Off Timer functions. (Clock must be set in order to use Timers.)

017 - ALARM

Gives the installer the option of making the Alarm function available to the end user. If set to 1, Alarm function is available to end user.

Set to 0 to disable the Alarm function.

*Note: Clock must be set before the Alarm function will work.

021 - V-CHIP (Parental Control)

Set to 1 to activate V-Chip (Parental Control); have it available to end user to filter and control or otherwise restrict programming content that can appear. Set to 0 to turn V-Chip feature Off, not available to user; no programming restrictions can be set.

022 - MAX BLK HRS (Maximum Block Hours) Sets hours from 0 to 99 for the maximum V-Chip (Parental Control) block hours. Default setting is for 12 blocking hours.

023 - CAPTION LOCK

Set to 1 to restore previous caption On/Off state after turn Off. If set to 0, captions are always Off at turn On.

(Continued from previous page)

028 - CH. OVERIDE (Channel Override)

If set to 1, the user can select channels with either Channel up/down or by direct keypad entry. If set to 0, only those channels that are added on the channel list can be selected.

029 - OLD OCV (On Command VideoTM)

Set to 1 for operation with systems from On Command Corporation.

030 - ACK MASK

M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider. When set to 1, changes M.P.I. for some OCV boxes.

031 - POLL RATE

M.P.I. Communication Parameter. Selects Poll Rate for M.P.I. Leave at default setting unless changed by Pay-Per-View provider. Step size of 16 ms.

032 - TIMING PULSE

M.P.I. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider. Sets baud rate. Step size of 4.3 uS.

034 - CAMPORT EN. (Camera Port Enable)

Set to 1 to enable Video 2 input on display panel. If set to 0, Video 2 input on display panel is not functional.

035 - COMPPORT EN. (Computer Port Enable) Enable/disables display panel HDMI input jack. Set to 0 to disable, set to 1 to enable.

*Note: The setting above is ignored if Installer item 093 RJP AVAIL ABLE, is set to 1.

038 - YPrPb EN. (Rear Component Video Enable) Set to 1 to enable display panel rear Component Video 1 input.

Set to 0 to disable display panel rear Component Video 1 input.

039 - REAR AUX EN. (Rear Aux Enable)

Set to 1 to enable display panel rear AUX (Video 1) input.

Set to 0 to disable display panel rear AUX (Video 1) input.

040 - AUTO CAMPORT

Set to 1 to automatically switch to Camport when equipment is connected to front Video input.

Set to 0 to disable front Video automatic source selection.

*Note: This item must be set to 0 in order to enable item 093 RJP AVAILABLE to be set to 1.

046 - STRT AUX SRCE (Start Aux Source)

Sets the starting AUX source.

 

Start source if start channel =0

 

1 = Video1

4 = RGB1

7 = Video 3 / S-Video

2 = Video2

5 = Component 2 255 = Last Aux

3 = HDMI 1 6 = Component 1

047 - AUX STATUS

Set to 1 for M.P.I. AUX source to be reported as a channel number instead of channel 0. Set to 0 to disable AUX identification change.

Controls M.P.I. status channel response for AUX inputs.

(Continued on next page)

60

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Installation and Operating Guide Regulatory Information Party Responsible for Product ComplianceCleaning and Disinfection Safety Instructions Important Safety InstructionsContents Accessories PreparationRemote Control Sensor Front Panel InformationPreparation Back Panel Information Here shown may be somewhat different from your TVVesa Wall Maunting TV Swivel StandExternal Equipment Setup External Equipment SetupAntenna or Cable Connection HD Receiver Setup SetupExternal Equipment Setup When connecting Hdmi cableWhen connecting Hdmi to DVI cable DVD Setup SetupConnect the S-VIDEO output of the VCR to Video input on the setConnect the audio outputs of the VCR to the a Udio Input jacks on the setVCR Setup Product bearing this phenomenonWhen connecting with a RCA cable External Equipment Setup Digital Audio OutputPC Setup Connect the DVI output of the PC to the HDMI/DVIExternal Equipment Screen Setup for PC Mode OverviewDVI Hookup to RJP or DVD Player Computer PC HookupUser Remote Control Button Functions Watching TV / Channel ControlWatching TV / Channel Control Installer Remote Control Button Functions Number KeypadON-SCREEN Menus Selection SAP DisplayChannel Search Auto Program Channel SearchWatching TV ChannelChannel List Watching TV /CHANNEL Control Add the label to the channelChecking the Strength of the Digital Signal Unstable ScreenTime Setting Clock SettingManual Time Settings TimeAutomatic Time Settings Time SettingHours Time Setting Time Zone SettingsDaylight Saving TV Activation Time Settings TV Deactivation Time SettingsAuto Off SET Password & Lock System Entering a PIN PasswordParental CONTROL/RATINGS Parental CONTROL/RATINGSParental CONTROL/RATINGS Set Block HourMovie & TV Ratings Tvpg RatingsMpaa Ratings Restricting movies by their ratingDescription of the Mpaa and TV FCC Rating Codes Canadian English Ratings Canadian French RatingsDownloadable Rating Analog Mode Sound & Language ControlCaption / Text Turn Captions On/OffDigital Captions Mode Use the ADJ D or E button to choose Service 1-ServiceDigital Font Options LanguagePreset Sound Settings Sound Setting Adjustment-User ModeAdjust the sound to suit your taste and room situations Sound & Language ControlSound Balance Setup Digital Audio Output SettingsSound & Language Control Automatic Volume Control Settings Analog Audio SettingsDigital Audio Language Settings Using External SpeakersSound & Language Control Use the a DJ D or E button to highlight Internal SpeakerMenu Language Menu Transparency Settings Set IDUse the a DJ D or E button to highlight Menu Transparency and press the O K Enter buttonPreset Picture Settings Picture PresetColor Temperature Settings Picture ControlManual Picture Adjustment Screen Format AdjustmentsPicture Control Picture ControlFilm Mode Options Use the a DJ D or E button to choose Film ModeNoise Reduction Use the a DJ D or E button to choose Noise ReductionCommercial Mode Installer OverviewCommercial ModeCommercial Mode Setup Commercial ModeCommercial Mode Cloning CONNECTIONS/LEARNING SetupClone Programmer Learning Setup Learning the Master TV SetupCloning CONNECTIONS/TEACHING Setup Teaching the Master Setup to Another 26LH1DC3/4/5000 Installer Menu Installer Menu Items 035 throughInstaller Sequence = IRCMute Disable Sleep TimerCaption Lock Poll Rate= Green = Violet Quick ShutoffKEY Lock RJP AvailableAtsc Tune Mode Selects Atsc tuning mode 0=Virtual, 1=PhysicalAtsc Band Start Minor ChannelTV Features / Menus that can be Cloned PeferenceAdding Channel Icons and Labels in the 2-5-4 + Menu Mode To exit the menu when done press MenuTo go to the next channel Detailed Information For Making a Master TV Making a Master TVSoftware Version Check 26LH1DC3/4/5 Camport Auto Sense Operation 26LH1DC3/4/5 Aux Input Configuration 26LH1DC3/4/5 Aux Input ConfigurationTroubleshooting AppendixAppendix Wrong Installer menu Settings Software problem Remote not in TV ModeAudio muted Broadcast problem TV Speakers Off AppendixCloning Procedure Troubleshooting Reset Clone After Static Shock26LH1DC3/4/5 not Turned on Weak batteriesProcedure interrupted Clone should only scan Channels onceDifferent TV models Steps omitted or notClone Troubleshooting Flow Chart TV Operating Check Glossary of Terms OHM RF CableInstaller Quick Setup Guide Page Page Product Specifications
Top Page Image Contents