LG Electronics 26LH1DC4, 26LH1DC5 manual 26LH1DC3/4/5 Camport Auto Sense Operation

PEFERENCE

26LH1DC3/4/5 Camport Auto Sense Operation

The CAMPORT Auto Sense function is enabled	CAMPORT (Front Video) Functionality Control
when:
	Item 34	Item 40	Front Video
1. Installer Menu Item 34, CAMPORT EN is set to
	CAMPORT EN	AUTO CAMPORT	Operation
1 AND
	0	0	Disabled
2. Installer Menu Item 40, AUTO CAMPORT is
	0	1	Disabled
enabled (1).
	1	0	Selectable
Selectable= Can be accessed with TV/AV key,	1	1	Auto Sense
direct access, etc.
Auto Sense= Switches to this input when
connector is inserted.
The camport (Front Video) has the highest priority
and will override any commands including tuning to
the Start Channel.
CAMPORT Operation (Stand-Alone)
	Previous State	Operation State	State	COMMERCIAL
When Camport Auto Sense is enabled as above,	Before Inserting	While CAMPORT	Upon Removal
the TV’s source will switch to the front video	CAMPORT	Is Active	Of CAMPORT
whenever a plug is inserted into any of the front
	Aux or RF Channel	None	Previous Aux
panel video inputs (either composite Video or			or RF Channel
S-Video).
	Aux or RF Channel	Direct Access	Last Requested
When the plug is removed, the TV will switch back			RF or Aux Channel
	Aux or RF Channel	Ch Up/Down,	Previous Aux	MODE
to the Previous channel or input source that the		Flashback	or RF Channel
TV was using before the Plug was inserted.		and TV/AV Keys
However, if any direct access to an RF channel or
Aux channel is requested while the camport is
active, then, when the camport plug is removed,
the TV will switch to the last requested channel.
Source changes using any Source Keys (TV/AV)
are ignored. Channel Up/Channel Down and
Flashback Commands are not direct access tuning
commands and they are also ignored.

CAMPORT Operation (PPV)

The operation will be similar to that of the Stand-Alone mode.

However, the PPV providers may send different commands to the TV for the same user commands. For instance, some providers will always send a direct tune command when it receives a channel up/down or a flashback command while other PPV providers will just send a key command.

Previous State	Operation	State
Before Inserting	While CAMPORT	Upon Removal
CAMPORT	Is Active	Of CAMPORT
Aux or RF Channel	None	Previous Aux
		or RF Channel
Aux or RF Channel	Direct Access	Last Requested
		RF or Aux Channel
Aux or RF Channel	Ch Up/Down,	Last Requested
	Flashback	Channel if PPV
	and TV/AV Keys	translates it to direct
		access tuning
		command. Otherwise,
		goes to Previous Aux
		or RF Channel

67