14ASSEMBLING AND PREPARING
ENGLISH
Mounting on a table
1Lift and tilt the TV into its upright position on a table.
-Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.
| 10 | cm (4 inches) |
|
|
|
| |
10 cm |
| 10 | cm |
|
| ||
|
|
| |
|
| 10 cm | |
2Connect the power cord to a wall outlet.
Caution
yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.
Securing the TV to a table
(For 42PN450P)
Fix the TV to a table to prevent from tilting forward, damage, and potential injury.
Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand.
WARNING
yyTo prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.
20˚ |
| 20˚ |
|
|
|
Caution
yyWhen adjusting the angle of the TV, watch out for your fingers.
-Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.