LG Electronics 50PN530P, 42PN450P To a wall plug to the TV, To an External device To the TV

ASSEMBLING AND PREPARING 9

CAUTION

yyDo not use any unapproved items to ensure the safety and product life span.

yyAny damages or injuries by using unapproved items are not covered by the warranty.

yySome models appear to have a thin film on the screen. It is actually part of the screen, do not remove it.

NOTE

yyThe items supplied with your product may vary depending on the model.

yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.

	B	B
A		A

*A 10 mm (0.39 inches) *B 18 mm (0.7 inches)

yyHow to use the ferrite core

-If there are three ferrite cores, follow as shown in Figures 1-1, Figure 2, Figure 3

-If there are four ferrite cores, follow as shown in Figures 1-2, Figure 2, Figure 3

1 Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.

ENGLISH

[to a wall plug] [to the TV]

[Figure 1-1]

[to a wall plug] [to the TV]

[Figure 1-2]

2 Use the ferrite core to reduce the electromagnetic interference in the cable.

Place the ferrite core close to the TV. Wind the component cable on the ferrite core once.

(Black)

[Cross Section of

Ferrite Core]

[to an External device]		[to the TV]
	[Figure 2]	10 mm(+ / - 5 mm)

3 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.

[to an External device] [to the TV]

(Black)

[Cross Section of

Ferrite Core]

		(Gray)
[Figure 3]	10 mm(+ / - 5 mm)
		[Cross Section of
		Ferrite Core]