LG Electronics 50PN530P Volume Mute Command k e, Aspect Ratio Command k c Main Picture Size

Page 37

EXTERNAL CONTROL DEVICE SETUP 37

* Commands may work differently depending on model and signal.

01.Power (Command: k a) ►►To control Power Off of the set.

Transmission[k][a][ ][Set ID][ ][Data][Cr]

Data 00 : Power Off

Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►►To Show Power On. (Works TV is On Only)

Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][01][x]

*Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function.

*In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.

04. Volume Mute (Command: k e)

►►To control volume mute on/off.

You can also adjust mute using the MUTE button on remote control.

Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on)

Ack [e][ ][Set ID][ ][OK/NG][Data][x]

02.Aspect Ratio (Command: k c) (Main Picture Size)

►►To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01 : Normal screen

07 : 14:9

 

(4:3)

(Europe, Colombia, Mid-East,

02

: Wide screen

Asia except South Korea and

 

(16:9)

Japan)

04

: Zoom

09 : * Just Scan

05

: Zoom 2

0B : Full Wide

(Latin America

(Europe, Colombia, Mid-

except Colombia

East, Asia except South

Only)

Korea and Japan)

06

: Set by Program/ 10 to 1F : Cinema Zoom 1

 

Original

to 16

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

*Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.

*In DTV/HDMI/Component mode (high-definition), Just Scan is available.

*Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially.

03.Screen Mute (Command: k d) ►►To select screen mute on/off.

Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00 : Screen mute off (Picture on) Video mute off

01 : Screen mute on (Picture off)

10 : Video mute on

Ack [d][ ][Set ID][ ][OK/NG][Data][x]

05. Volume Control (Command: k f)

►►To adjust volume.

You can also adjust volume with the volume buttons on remote control.

Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

Ack [f][ ][Set ID][ ][OK/NG][Data][x]

06. Contrast (Command: k g)

►►To adjust screen contrast.

You can also adjust contrast in the PICTURE menu.

Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

07. Brightness (Command: k h)

►►To adjust screen brightness.

You can also adjust brightness in the PICTURE menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

Ack [h][ ][Set ID][ ][OK/NG][Data][x]

08. Color/Colour (Command: k i)

►►To adjust the screen Color(Colour).

You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack [i][ ][Set ID][ ][OK/NG][Data][x]

ENGLISH

Image 37
Contents Plasma TV English Important Safety InstructionsEnglish YyGrounding YyDisconnecting the Main PowerYyANTENNAS Outdoor Antenna Grounding Can differ by country YyMovingScreen Preventing Image burn or Burn-in on your TVYyDot Defect For USA and Canada YyGenerated SoundLicenses Table of Contents Unpacking Assembling and PreparingTo an External device To the TV To a wall plug to the TVButton Description Parts and buttonsLifting and moving the TV Attaching the stand Setting up the TVFor 50PN450P, 50PN530P To detach the standMounting on a table Optional Mounting on a wallTidying cables Copper wire Connecting to an antenna or cableMaking Connections Hdmi Connection Connecting to a HD receiver, DVD Player or VCRDVI to Hdmi Connection Hdmi is the best way to connect a deviceComponent Connection Yellow White RED Composite ConnectionHDMI, DVI to Hdmi or RGB Connection Connecting to a PCChoose method A, B or C to make connection Not Provided Digital Optical Audio Connection Connecting to an Audio SystemConnecting a USB Device Number button Remote ControlDash Back OK ꔉControl buttons ꕗ, ꕖ, ꕘ, ꕚ, ꕙ FreezeWatching TV Language Mode Setting Time Setting Auto TuningTurning the TV on for the first time Problem Solution TroubleshootingVideo 42PN450P 50PN450P Specifications50PN530P 60PN530P 720 x 31.469 70.08 Resolution Horizontal VerticalIR Codes RS-232C Setup External Control Device SetupType of connector Sub 9-Pin Male Option RS-232C configurationsCommunication Parameters Command reference listCarriage Return Ascii code ‘0x0D’ Transmission / Receiving ProtocolSpace Ascii code ‘0x20’ Aspect Ratio Command k c Main Picture Size Volume Mute Command k eVolume Control Command k f Contrast Command k gColorColour Temperature Command x u Tint Command k jSharpness Command k k OSD Select Command k lColombia Model For South Korea, North/Latin America exceptFor Japan Model Control Panel Light Command m g Control Back Light Command m gChannelProgramme Add/DelSkip Command m b Key Command m cExtended 3DCommand x v only 3D models Depending on model DCommand x t only 3D models Depending on modelDon’t care Page Child Safety LG Customer Information Center