Bang & Olufsen BeoVision 9 manual Replay, Go to a specific point, Step backwards or forwards

Page 10

8	HDR – Pause and replay

With the optional hard disc recorder, pause, repeat and resume the current programme. The TV continues saving during replay, so you are sure to see the entire programme.

The current channel is saved in a three-hour replay buffer

- 0:19	REPLAY	-0:05

19 minutes are saved in the replay buffer

The current picture is 5 minutes behind the live signal

Beo5 operation

Pause

Pause the programme on the current channel.

Replay

Replay a programme that you have paused.

Go to a specific point

Enter a specific time to go to in the buffer content.

Step backwards or forwards

Step backwards or forwards minute by minute.

Cue backwards or forwards

Press button again to change speed.

Pause replay

Pause replay of the buffer content.

Save the replay buffer

Save the buffer contents to the hard disc recorder.

Go to live signal or replay mode

Switch between the live signal and replay mode.

Glossary

Replay You cannot pause or replay a programme while the TV is recording another programme or copying a recording, nor can you pause or replay programmes copy-protected by Macrovision. If you pause a programme for three hours, the TV automatically starts replay from the point at which you paused the programme.

Slow replay Slow replay backwards is not possible.

Save the replay Copy the content of the replay buffer to the ‘HARD DISC CONTENT’ list. The content before the recording buffer start time will be deleted when the TV is switched off.

Image 10

Contents BeoVision 9 Page Contents Dear CustomerBeo5 operation Beo4 operation How to use your remote controlUseful hints Navigate in menus Menus allow you to adjust settingsIntroduction Menu name Menu options Information fieldIndicates more channels Beo5 operationTurn the TV See second source Divide the screen to watch two sources at the same timeCounter-clockwise Wheel either way Adjust volume. To mute, turn quicklyPress Start recording Stop recordingGlossary ‘MEMO’ ‘SETUP’‘REVEAL’ Teletext subtitlesStep backwards or forwards ReplayGo to a specific point Cue backwards or forwardsPress You can step frame by frame Go to live Return to replay mode SignalSearch for start point Stop Activate Accept saving Step or cue backwards or forwards Switch to previous or nextSelect and play a recording Pause or stop playback Browse through recordingsRecording Switch source Switch off TV Switch source Switch off TVOpen ‘HARD Disc Select CONTENT’ menu Play Previous/next ActivateMenu overlay gives you quick access to selected functions Select function*1Select source Press Select sourcePage Contents BeoLink Use a source present in one room TV sound on the audio speakersAudio sound on the TV speakers Use a link room sourceSelect TV speaker Select audio source zone Select audioSpeaker zone Select AV*2 Select video sourceSet option for TV Connect the audio systemSet option for audio system Select options Make link connections Switch on the system modulatorChange the link frequency Set option for a link room TV Connect link room TVConnect the link room TV to the mains supply Select zone in which Select source Desired TV is placed Set the correct optionBeo5 operate the TVs Guide enclosed with your Beo4Beo4 operate TV in option LinkPage Contents Advanced use Check Timers already set Set a Timer recordingTimer recording via teletext HDR Record a programmeName a recording Protect or unprotect a recordingDelete a recording Split a recordingHDR Copy and group recordings Lock CODE’ Activate/deactivate Parental LockSet a Parental Lock code Parental LockSelect speakers for movie sound Switch to Home cinemaSurround sound and Home cinema Select picture formatSound type Change sound type or languageEnter a Wake-up Timer Wake-up TimerCheck or delete a Wake-up Timer View, edit or delete a Timer Switch on the Play TimerTimed play and timed standby Edit and add TV channels ‘ADJUSTMENT’ Adjust pictureAdjust sound Mute the pictureManual calibration Calibrate colour accuracy of the screenAutomatic calibration After manual calibrationDelete the pincode Activate the pincode systemChange the pincode Enter the pincode‘TUNING’ menu Tuner setupDisable the internal tuner TUNER’Page Show menu overlay*1 Operate other equipment with Beo5 or Beo4Beo5 operation Select functionPlayback on a DVD player Use equipment menusTo press Exit instead of Stop to return to a Previous menu Page Contents Installation Remove supports Set up your televisionPlace the TV Fasten base coverOverview Run cables‘neat’ bundle of cables Expand your setup InformationRegister additional equipment Loudspeakers Set up additional equipmentVideo signals Additional video equipmentBeoMaster Home cinema setupIR-receiver Audio systemConnection panels AUXVideo in AV4 AV6AV1 Master LinkFirst-time setup of your television Make settingsCalibrate the speakers Sound AdjustmentStand Adjustment Calibrate the standSet speaker type Loudspeaker setupSelect speaker setup Set speaker roleSee active sound system Set speaker distanceCalibrate the sound level ‘SEQUENCE’Time and date Additional settingsPositions of the TV ‘STANDBY’Set up hard disc recorder Menu Language TUNING*3 CLOCK*3Make settings CleaningOn-screen menus ’ADVANCED’ feature level only Re-installation of data Safety copy and anti-virus programSafety copy Anti-virus programEnd User Licence Agreement Eula Eula TermsWeee Environmental protection Acknowledgements and liabilityPage Page