Bang & Olufsen BeoVision 9 manual Connect link room TV, Set option for a link room TV

Page 23

Your television in a link room

21

Connect link room TV

Follow the procedure described here when you connect your TV for use in a link room.

Set option for a link room TV

For your entire system to function properly, it is essential that the TV in the link room is set to the correct option before you connect it to the system in the main room. Place yourself in front of the link room TV.

If you have a BeoLink system, operate all connected systems through the TV in a link room.

1Connect the link room TV to the mains supply.

2Using your remote control, programme the link room TV to the correct option.

3Disconnect the link room TV from the mains.

4Make the necessary connections.

5Reconnect the link room TV to the mains supply.

Option

and

pgm

…

Hold

Press

Press

Select zone in which TV

is placed

and

LIST

LIST

LIST

6

Hold

Press

Select OPTION? and

Select V.OPT Select

accept

Option 6*1

BeoMaster If your TV is equipped with a BeoMaster, it cannot be set up and used in a link room.

Timer programming Programme a Play Timer on the TV in the main room.

1*NOTE! If you have a Beo4 and you connect the TV for use in a link room where other link systems are already connected, such as speakers, you must set the TV to Option 5 instead.

Image 23

Contents BeoVision 9 Page Dear Customer ContentsUseful hints How to use your remote controlBeo5 operation Beo4 operation Menu name Menu options Information field Menus allow you to adjust settingsIntroduction Navigate in menusDivide the screen to watch two sources at the same time Beo5 operationTurn the TV See second source Indicates more channelsStart recording Stop recording Adjust volume. To mute, turn quicklyPress Counter-clockwise Wheel either wayGlossary Teletext subtitles ‘SETUP’‘REVEAL’ ‘MEMO’Cue backwards or forwards ReplayGo to a specific point Step backwards or forwardsSearch for start point Stop Activate Accept saving Go to live Return to replay mode SignalPress You can step frame by frame Browse through recordings Switch to previous or nextSelect and play a recording Pause or stop playback Step or cue backwards or forwardsPrevious/next Activate Switch source Switch off TVOpen ‘HARD Disc Select CONTENT’ menu Play Recording Switch source Switch off TVSelect function*1 Menu overlay gives you quick access to selected functionsSelect source Select source PressPage Contents BeoLink Use a link room source TV sound on the audio speakersAudio sound on the TV speakers Use a source present in one roomSelect AV*2 Select video source Select audioSpeaker zone Select TV speaker Select audio source zoneSet option for audio system Connect the audio systemSet option for TV Select options Change the link frequency Switch on the system modulatorMake link connections Connect the link room TV to the mains supply Connect link room TVSet option for a link room TV Guide enclosed with your Beo4 Set the correct optionBeo5 operate the TVs Select zone in which Select source Desired TV is placedLink Beo4 operate TV in optionPage Contents Advanced use HDR Record a programme Set a Timer recordingTimer recording via teletext Check Timers already setSplit a recording Protect or unprotect a recordingDelete a recording Name a recordingHDR Copy and group recordings Parental Lock Activate/deactivate Parental LockSet a Parental Lock code Lock CODE’Select picture format Switch to Home cinemaSurround sound and Home cinema Select speakers for movie soundChange sound type or language Sound typeCheck or delete a Wake-up Timer Wake-up TimerEnter a Wake-up Timer Timed play and timed standby Switch on the Play TimerView, edit or delete a Timer Edit and add TV channels Mute the picture Adjust pictureAdjust sound ‘ADJUSTMENT’After manual calibration Calibrate colour accuracy of the screenAutomatic calibration Manual calibrationEnter the pincode Activate the pincode systemChange the pincode Delete the pincodeTUNER’ Tuner setupDisable the internal tuner ‘TUNING’ menuPage Select function Operate other equipment with Beo5 or Beo4Beo5 operation Show menu overlay*1To press Exit instead of Stop to return to a Previous menu Use equipment menusPlayback on a DVD player Page Contents Installation Fasten base cover Set up your televisionPlace the TV Remove supports‘neat’ bundle of cables Run cablesOverview Information Expand your setupRegister additional equipment Additional video equipment Set up additional equipmentVideo signals LoudspeakersAudio system Home cinema setupIR-receiver BeoMasterAUX Connection panelsMaster Link AV6AV1 Video in AV4Make settings First-time setup of your televisionCalibrate the stand Sound AdjustmentStand Adjustment Calibrate the speakersSet speaker role Loudspeaker setupSelect speaker setup Set speaker type‘SEQUENCE’ Set speaker distanceCalibrate the sound level See active sound system‘STANDBY’ Additional settingsPositions of the TV Time and dateMenu Language TUNING*3 CLOCK*3 Set up hard disc recorderOn-screen menus CleaningMake settings ’ADVANCED’ feature level only Anti-virus program Safety copy and anti-virus programSafety copy Re-installation of dataEula Terms End User Licence Agreement EulaAcknowledgements and liability Weee Environmental protectionPage Page