Bang & Olufsen BeoVision 9 manual Calibrate colour accuracy of the screen, Automatic calibration

Page 38

36	Calibrate colour accuracy of the screen

Automatic calibration

Approximately for every 100 hours of use, the TV will initiate a calibration automatically, when you press the standby button.

Automatic Colour Management ensures perfect colours on the screen continuosly. During calibration, a sensor arm swings down from the TV frame and an on-screen bar changes between various greyscale colours.

We recommend that you let the TV perform calibration automatically, instead of manually.

Manual calibration

The TV must be switched on for more than two minutes and be in TV mode for the ‘AUTO COLOUR MANAGEMENT’ menu to be available.

Bring up ‘TV SETUP’		Select ‘OPTIONS’		Activate ‘AUTO		Calibration process
Bring up ‘TV SETUP’		Select ‘OPTIONS’		COLOUR		Calibration process
menu		menu		COLOUR		1
menu		menu		MANAGEMENT‘		begins*
				MANAGEMENT‘

After manual calibration	Sensor arm retracts and TV returns to last
	chosen source

‘CALIBRATION COMPLETE’ shortly appears on screen

Useful hints

1*Manual calibration All text is removed from the screen, the sensor arm swings down and the calibration starts.

Calibration failed If the sensor arm does not swing down fully, the calibration is not performed and the arm is retracted if needed. If the calibration was initiated automatically, the TV will attempt to execute the calibration the next time it is switched off.

NOTE! Never switch off your system or disconnect it from the mains during calibration.

Image 38

Contents BeoVision 9 Page Contents Dear CustomerUseful hints How to use your remote controlBeo5 operation Beo4 operation Navigate in menus Menus allow you to adjust settingsIntroduction Menu name Menu options Information fieldIndicates more channels Beo5 operationTurn the TV See second source Divide the screen to watch two sources at the same timeCounter-clockwise Wheel either way Adjust volume. To mute, turn quicklyPress Start recording Stop recordingGlossary ‘MEMO’ ‘SETUP’‘REVEAL’ Teletext subtitlesStep backwards or forwards ReplayGo to a specific point Cue backwards or forwardsSearch for start point Stop Activate Accept saving Go to live Return to replay mode SignalPress You can step frame by frame Step or cue backwards or forwards Switch to previous or nextSelect and play a recording Pause or stop playback Browse through recordingsRecording Switch source Switch off TV Switch source Switch off TVOpen ‘HARD Disc Select CONTENT’ menu Play Previous/next ActivateMenu overlay gives you quick access to selected functions Select function*1Select source Press Select sourcePage Contents BeoLink Use a source present in one room TV sound on the audio speakersAudio sound on the TV speakers Use a link room sourceSelect TV speaker Select audio source zone Select audioSpeaker zone Select AV*2 Select video sourceSet option for audio system Connect the audio systemSet option for TV Select options Change the link frequency Switch on the system modulatorMake link connections Connect the link room TV to the mains supply Connect link room TVSet option for a link room TV Select zone in which Select source Desired TV is placed Set the correct optionBeo5 operate the TVs Guide enclosed with your Beo4Beo4 operate TV in option LinkPage Contents Advanced use Check Timers already set Set a Timer recordingTimer recording via teletext HDR Record a programmeName a recording Protect or unprotect a recordingDelete a recording Split a recordingHDR Copy and group recordings Lock CODE’ Activate/deactivate Parental LockSet a Parental Lock code Parental LockSelect speakers for movie sound Switch to Home cinemaSurround sound and Home cinema Select picture formatSound type Change sound type or languageCheck or delete a Wake-up Timer Wake-up TimerEnter a Wake-up Timer Timed play and timed standby Switch on the Play TimerView, edit or delete a Timer Edit and add TV channels ‘ADJUSTMENT’ Adjust pictureAdjust sound Mute the pictureManual calibration Calibrate colour accuracy of the screenAutomatic calibration After manual calibrationDelete the pincode Activate the pincode systemChange the pincode Enter the pincode‘TUNING’ menu Tuner setupDisable the internal tuner TUNER’Page Show menu overlay*1 Operate other equipment with Beo5 or Beo4Beo5 operation Select functionTo press Exit instead of Stop to return to a Previous menu Use equipment menusPlayback on a DVD player Page Contents Installation Remove supports Set up your televisionPlace the TV Fasten base cover‘neat’ bundle of cables Run cablesOverview Expand your setup InformationRegister additional equipment Loudspeakers Set up additional equipmentVideo signals Additional video equipmentBeoMaster Home cinema setupIR-receiver Audio systemConnection panels AUXVideo in AV4 AV6AV1 Master LinkFirst-time setup of your television Make settingsCalibrate the speakers Sound AdjustmentStand Adjustment Calibrate the standSet speaker type Loudspeaker setupSelect speaker setup Set speaker roleSee active sound system Set speaker distanceCalibrate the sound level ‘SEQUENCE’Time and date Additional settingsPositions of the TV ‘STANDBY’Set up hard disc recorder Menu Language TUNING*3 CLOCK*3On-screen menus CleaningMake settings ’ADVANCED’ feature level only Re-installation of data Safety copy and anti-virus programSafety copy Anti-virus programEnd User Licence Agreement Eula Eula TermsWeee Environmental protection Acknowledgements and liabilityPage Page