Apex Digital LD1919 Basic operation, Menu Language, Tuning Band, Auto Channel Search

7- TV Operation

(1) Basic operation

Initial Setup Menu

NOTE: If this is the first time you turn on the LCD TV, the Initial Setup Menu will display.

Menu Language

Select the preferred language when viewing on screen menus. Use the ENTER/► to select language.

Tuning Band

Select Tuning Band mode. Press ENTER/► button to select Air/Cable STD/Cable HRC/Cable IRC/Cable Auto.

Auto Channel Search

When using your LCD TV for the first time. Please scan for all available broadcasting channels in your local area. Press ENTER/► button to enter the Auto Channel Search Program.

NOTE: Auto Channel Search for TV channels in your local area may take several minutes to complete.

Choosing a TV channel

1.Press CH+/CH- button on the side panel or on the remote control. Press CH+ button for the next channel

Press CH - button for the previous channel.

2.Press 0-9 buttons and button.

You can select the channel by pressing 0 to 9 buttons and button directly for the channel you

want.

Example:
To select 1-Analog channel (e.g. Channel 5): Press the 5, then press	and 0 button.
To select 2- Analog channel (e.g. Channel 20): Press the 2 and 0 buttons , then press		and 0
button.
To select 3- Analog channel (e.g. Channel 103): Press the 1 and 0 and 3 button, then press			and
0 button.

To select a channel number for digital channel (e.g. Channel 2-1): Press the 2 button, then press and 1 button, then press ENTER button.

Note: After select the digit button, the digit will be memorized.

- 10 -