061506_OD LCD Manual 6/15/06 4:57 PM Page 3
FORWARD Mode
When pressing the FORWARD button, the LCD dis- plays AUTO and the motor enters the FORWARD mode. Press and hold the FORWARD button in order to keep the motor running forward. When the FORWARD button is released, the motor will stop.
ON/OFF Reverse
Maintain 
Forward
OVERLOAD Mode
When the shredder overloads during shredding, the motor will stop running and the LCD will flash the OVERLOAD icon. Press the REVERSE but- ton the motor will start reversing and the LCD will show REVERSE. When the overloaded paper is removed from the throat, the LCD will show OVERLOAD, the motor will start running for three seconds and the shredder will start automatically clearing any papers. After the motor stops, the LCD will show AUTO.
If user cannot remove the paper from the throat by pressing the REVERSE button, tear off the remaining paper and press ON/OFF to shut off the shredder. Press ON/OFF again to start shred- ding and clean out the paper. If unable to clean out the paper in one action, repeat the above process until the paper is completely removed and the LCD displays AUTO.
DOOR OPEN Mode
When the paper bin is pulled out or the bin door is opened while shredding, the motor will stop immediately and sound the alarm. The LCD will flash DOOR OPEN. To resume normal function, the bin or door must be placed back to original position. The LCD will show AUTO.
ON/OFF Reverse
Maintain 
ON/OFF Reverse
Maintain 
Forward
Forward
3