INSTALL CABLES
WARNING: Be sure all electrical power to the cabinet is off before connecting any of the cables.
WARNING: There is a key guide for alignment on the cables. Be sure the cable plug and receptacles are aligned properly using the key guide. Misalignment can cause short circuiting.
NOTE: The glider has an AC- DC converter built into the power supply. Be sure the AC supply is 110 vac and properly grounded.
The power supply is mounted on the back of the Glider tray. Be sure the power plug going in to the power supply is pushed all the way in. The power supply cable should be connected to
asuitable
The socket outlet shall be installed near the equipment and shall be easily accessible.
The power cable comes out at the back of the power supply on the rear of the Glider tray. Be sure the plug is pushed all the way in.
1 1
Doc#